Jump to content
SAU Community

Recommended Posts

Dudes,

Sick of axle tramp and a vauge rear end on your car? The solution is Pineapples... Pinapples get rid of all axle tramp due to subframe movement.

Q: WTF? Pineapples?

A: Pineapples are a urethane spacer that removes a lot of flex in your rear subframe assembly. They can also be used to change the angle of your rear subframe for hard launches or consistent drifting.

They are resonably easy to install, or if you're in Melbourne I can install for you. And are also easy to remove or change from one setup to the other.

These are identical to the Garage URAS ones imported by Japanese motorsport for $150 + freight.

I have access to these also, but for a lot cheaper $115 inluding freight, and unlike URAS ones, mine have the instructions in ENGLISH!

I have attached a picture of them.

I will only send them via a direct deposit of $115 to my account and then express post them to your door. I have done this method with heaps of people previously without any complaints whatsoever. E-Mail me if you are interested.

[email protected]

Doctor Drift

Link to comment
https://www.sau.com.au/forums/topic/3659-pineapples-suit-r32-or-s13/
Share on other sites

Paint 'em black and you wouldn't even know they're there.

I cannot see how they would be illegal, there is no modification required to fit it. I guess it's comparable to using urethane sway bar mounts instead of rubber?

However, I cannot say for sure if they are legal.

Doc.

The difference, although I haven't actually felt in R33, is huge.... The rear of the car is a lot more stable and direct. It's A bit hard to explain, but believe me it's good!!

Call me if you'd like to discuss it further.

Doc.

0411 878 961

sorry to steel your thunder mate but you can get the 'whiteline' ones direct from www.whiteline.com.au with english instuctions. your after part number KCA349 diff lock kit.

They work a treat.

and heres instructions on how to install. Yes its for a Z32 but its the same deal.

http://www.z32.org/html/subframespacers.shtml

skyzerr33,

No problems mate, I'm assuming the whiteline ones are just another copy as well.

Whiteline kit's are around $5 more than I can get them for. If I get a big order I may be able to get them cheaper who knows?

Doc.

Originally posted by Dr_Drift

skyzerr33,  

No problems mate, I'm assuming the whiteline ones are just another copy as well.  

Whiteline kit's are around $5 more than I can get them for. If I get a big order I may be able to get them cheaper who knows?

Doc.

I'd say so (them being copies) and on the price if you can swing a cheaper price thats great you may want to organise a group buy.

Skyzzer33: Good suggestion.

PRANK: You have mail

IF ANYONE WANTS SOME AND THEIR NOT IN A HURRY FOR THEM WE'LL DO A GROUP BUY TO GET THEM CHEAPER.

Ok, I thought 10 would be a reasonable number, so if I get 10 orders I can source them for.....

$90 per Set if you pick them up

$95 Delivered to your Door

If you are definately interested please e-mail me your confirmation.

Doc.

You guys should be able to organise a decent group deal, 'cause I just bought the Whiteline KCA349 kit today for $99.

It comes with simple (there's not much too it!) instructions for "all round", "drift", or "maximum traction".

The same KCA349 kit fits S13, S14, R32-R33 & Z32 Nissans.

I'll let you know what difference they make soon :) Unless someone who's already running the kit beats me to it? Matt Lowth?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...