Jump to content
SAU Community

Recommended Posts

Not true. A cat that is working stores a lot of heat compared to a gutted cat so all the epa need is an infra-red thermometer to check it's temp compared to the rest of the exhaust.

doesn't the stock cat have a heat shield on it? then they'd have to get under your car and take it off to see the surface temp of the cat. which means it needs to be on a hoist. which means you're at an EPA station, which means you've been issued an EPA notice already...

point is. could any cop/road side inspection tell that your running a 'decat' inside a cat shell.

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Very highly doubt a cop could tell you have a decat. Unless they have emissions testing equipment?

Either way if you are at an epa station, you arent going to keep the decat on the car. Regardless of the method they use, they will pick you up for a gutted cat, everytime. You would have to be a complete idiot to turn up for your epa inspection with a gutted cat.

doesn't the stock cat have a heat shield on it? then they'd have to get under your car and take it off to see the surface temp of the cat. which means it needs to be on a hoist. which means you're at an EPA station, which means you've been issued an EPA notice already...

point is. could any cop/road side inspection tell that your running a 'decat' inside a cat shell.

They might confiscate it off you first. Then you wouldn't be able to re-cat it.

Is there that much of a flow difference that you could notice the difference between a 100cell cat and a decat? I've looked inside a 100cell cat before and it just looks like a punch of mcdonnald's straws stuck together? I'm sure it would make some filtration difference but I don't think the difference would be huge. If I did do the decat and somebody confiscated it off me I will have a spare one anyway.

I got defected last week when I wasn't doing anything wrong, If I was hooning I would understand but I don't feel like getting a road worthy again.

Is there that much of a flow difference that you could notice the difference between a 100cell cat and a decat? I've looked inside a 100cell cat before and it just looks like a punch of mcdonnald's straws stuck together? I'm sure it would make some filtration difference but I don't think the difference would be huge. If I did do the decat and somebody confiscated it off me I will have a spare one anyway.

I got defected last week when I wasn't doing anything wrong, If I was hooning I would understand but I don't feel like getting a road worthy again.

I dont think there is too much flow difference mate. Im assuming the car is a mild streeter, in which case i really dont think you would notice the difference between the two. As far as having your car confiscated, im pretty sure you have to be drag racing or doing burnouts etc that warrant a dangerous driving charge. In either case i can say that a decat will be the least of your worries. I think it comes down to your preference, and whether you want the peace of mind of not running a decat. For me, i just bought a hiflow because i didnt want the hassle of worrying about it. I even left it on the car when it went to the epa, and he just said it 'may' pass, but it would need engineer certificate.

I dont think there is too much flow difference mate. Im assuming the car is a mild streeter, in which case i really dont think you would notice the difference between the two. As far as having your car confiscated, im pretty sure you have to be drag racing or doing burnouts etc that warrant a dangerous driving charge. In either case i can say that a decat will be the least of your worries. I think it comes down to your preference, and whether you want the peace of mind of not running a decat. For me, i just bought a hiflow because i didnt want the hassle of worrying about it. I even left it on the car when it went to the epa, and he just said it 'may' pass, but it would need engineer certificate.

i suppose his decision is going to be based off how much a decat flows better/gains power/ less lag over a highflow cat versus the risk of being ass raped by the state government.

i don't think anybody here actually has any quantitative answer to how much decat flows better only that 'it does'.

Exactly ...way i see it there is nothing to be gained on the street from removing pollution gear so why not just keep it . Pretty sure I read somewhere that race/drift cars in Japan are required to keep pollution gear and they are hardly slow.

Whats it worth really ,10hp maybe at most, on a 400hp+ car its a pittance so just keep it and you will be doing the planet a favour . Just have a decat for the track if you want it and block of your charcoal cannister its not hard to change..

Do the right thing :D

PS.. This thread is stupid.....

all i know is you can get up to 20bhp gain from having a highflow cat!

in gran turismo 5 ofcourse..

Lmfao!! I bet Paul didnt run a cat in his supra in fast and the furious!

Seriously though, i agree with what arthur has said, but in the end it comes down to preference. Someone really needs to do a dyno run back to back with different cats to put this to rest, although i suspect the gains/losses in hp would be so little that it would just come down to different dyno runs.

the way I see it is that with a decat I can get an EPA, with a highflow I can get an EPA. Cops won't know it's a decat if the shell is still on it.

I want my car to sound a little bit more beefy than it does at the moment, but I don't want to be shattering glass as I drive past houses.

I don't really think it is easy to tell if a 2.5inch decat or a 3inch highflow cat has better flow without the use of something like a dyno test.

I've got a few weeks to think about it since I'm heading overseas next week.

the way I see it is that with a decat I can get an EPA, with a highflow I can get an EPA. Cops won't know it's a decat if the shell is still on it.

I want my car to sound a little bit more beefy than it does at the moment, but I don't want to be shattering glass as I drive past houses.

I don't really think it is easy to tell if a 2.5inch decat or a 3inch highflow cat has better flow without the use of something like a dyno test.

I've got a few weeks to think about it since I'm heading overseas next week.

With a good quality high flow cat you can pass an EPA. I think given there is barely any difference between a good high flow and a 3" decat, the high flow is the better option.

With a good quality high flow cat you can pass an EPA. I think given there is barely any difference between a good high flow and a 3" decat, the high flow is the better option.

but do the benefits outweigh the extra cost?

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...