M35 Dtc Code 1805

[JayM35]

Would the switch mod make any noticeable difference in a 250RS?

Just trying to get as much out of the 25 as possible before it goes.

[zei20l]

it depends, does your NA model have the same transmission? i thought they were a 4 speed auto

[Jetwreck]

Would the switch mod make any noticeable difference in a 250RS?

Just trying to get as much out of the 25 as possible before it goes.

but your's should be quite quick off the mark anyway!.....it's the VQ25DD with the 4 speed aye?.....should be 4:3 diff or something!

[Sunkist]

yeh the trans guys even said these boxes are heap stronger as your able to put larger clutch packs in em.

[Jetwreck]

yeh the trans guys even said these boxes are heap stronger as your able to put larger clutch packs in em.

really!

Edited June 20, 2011 by Jetwreck

[Sunkist]

you said something else you sod.

well yeh RVO and Kewish both said an RE4 is better as you can fit a larger and thicker clutch plates or packs.. and the fact that people have modded them so much

[Jetwreck]

you said something else you sod.

well yeh RVO and Kewish both said an RE4 is better as you can fit a larger and thicker clutch plates or packs.. and the fact that people have modded them so much

maybe!!!

zzzzzzzzzzzzzzzzz!!!!!

Edited June 20, 2011 by Jetwreck

[Sunkist]

idiot

[Jetwreck]

idiot

Arse clown!

[Sunkist]

Arse clown!

dont start this again

[Jetwreck]

dont start this again

***Craig fall's to the ground with laughter*****

As Aaron turn's his hat around stick's both arm's in the air and yell's "COME AT ME BRA!"

[Sunkist]

add's darker skin

[bigkevracer]

[Commsman]

That's the gayest pic ever. Seriously, I LOL'ed

[Sunkist]

idungeditt

[chad bob]

Hey guys,

Can any of you post a picture / basic description of which wire we are talking about? I'd like to throw a switch in my 300RX and see if I get the same results in an NA stag. Might be handy for the non turbo owners out there.

Also the computer's clandestine grip on my throttle application is annoying me to no end!

[scotty nm35]

Im not sure what ecu you have, if you can find the ecu pinouts for your car, its the brake input wire.

[chad bob]

Having trouble finding the VQ25DD / VQ30DD Pinout.

Do you have any idea where this wire goes at the input end? Eg: is there just a switch on the brake pedal with one wire for the brake lights and one for the BPP? If so, I'm keen to cut both and re-connect the one that makes the lights go

[scotty nm35]

The pinouts look the same, I guess you could try it at the ecu end. I think the signal comes from the BCM under the fusebox on the drivers side but dont quote me.

[chad bob]

Errm!

What is a BCM sorry?