Jump to content
SAU Community

Recommended Posts

  • Replies 127
  • Created
  • Last Reply

Top Posters In This Topic

Excellent,

I'm thinking of bringing the WRX out for this one if I can get the front camber sorted out.

Or I might just bring the ute and setup a BBQ for everyone, not deciced yet. I doubt the skyline will be making an appearance though, dispite how much I want to get out there and smash out another PB, on film this time!

oooOOoooooo

I rang a checked with the caretaker for track clearance the other day and all is good :) , just incase anyone was wondering :thumbsup:

You actually going to turn up for this one Toff? :nyaanyaa:

I'll come down for a look...

hmmm new 25/30 needs running in..... :thumbsup:

i plan on mate pinch.gif , the last one was out of my control to miss :down: . I thought you didn't like 25/30???

... I wouldn't ever put one in my GTR but it came up cheap with forgies, so I pulled it down checked the clearances and screwed it back together. Besides, you cant bitch about somthing untill you try it. :whistling:

See how it goes....

yeeer I run em in hard... no point f'n about.

Mine spent it's whole first day on the limiter, mostly because I was too busy screaming to think about throttle control whistling.gif

Edited by zoidbergmerc

yeah especially considering the result from powercruise.

have you not questioned that event already? and it was explained?....

Last time I was reading about them, hoseclamps didn't have anything to do with running in engines

Edited by jangles

yeah and when i questioned it you stated that you blew a cooler hose, and after the cloud of black smoke cleared and you drove back to the pits i asked you what happened and you told me that you forgot the anti lag and it died, i have a great video ill have to dig up for ppl to see, remember at the start line off of the street drags almost on the limiter and the starter guys gives the go ahead and bang, you get creamed and left in a cloud of smoke, funniest thing i ever seen....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...