Jump to content
SAU Community

Recommended Posts

Pretty sure i mentioned this before, but the price is 13k

if you message me with anything below this i will tell you to eat a dick.... if i can be bothered.... if not i will delete your message :)

luv fatz xxx

Funny not happy with people offering you less than what you want.. But all u do is just that to everyone else lol.

Porb put not neg unless inspected first.

I've seen this car in person little while back looked nice and in overall good condition!

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Yea i like lowballing myself, every one who knows me on here knows I'm a arsehat

Yea I am quite happy to take offers

also happy to f**k with people who low ball

If it sells it sells...I'd it doesn't I'll re-shell my race car into it when I tank it Into the wAll

  • 3 weeks later...

Hey mate , I'm selling my Car at the moment to buy a GTR but thought i'd offer this as a swap if you're keen.

http://www.skylinesaustralia.com/forums/topic/399641-pristine-jeep-wrangler-sport-98000ks-with-rwc-melbourne-swapstrade/

sorry guys not intrested in a swap( already own 5 skylines +tow car)

ill be giving the old girl a wash and polish and putting some new rims on it this weekend, ill get a shittone of phones at the time so you can see excactly what it looks like now as well( as the old pics are about 1 year old).

i ( jenna) just put 12 months rego on it so whoever buys it will be happy.

car will most likly be at texi as well if you want to check it out( jennas first even since little zoe turned up)

  • 2 weeks later...

i have begun to feel the love for this car again, mainly due to the absense of my race car

so jenna and i took it out for a sau day tomake sure its was ok stll

couple of picks to show you what it looks like

basically stock car running 10 psi managed second on the day

IMG_4945.jpg

yes its jennas car

only lady owner and shit... never been to the track

IMG_4961.jpg

IMG_4967.jpg

IMG_4975.jpg

IMG_4977.jpg

still for sale 12k

front brakes, rubber and clutch well bedded in now

:)

  • 2 weeks later...

Free bump for a dope car.

"Fatz" - how do those panasport rims fit over the brembo's??? Running spacers??

Also

What width tyres are they running.

Does car also come with the panasports.

Cheers!!

panasports require a 5 mm spacer to clear brembos, i run a 255/45/17 ku36's on it ( current tyres have about 10% tread left) car comes with a a set of rotor rb rims in 18x9 +20 gunmetal coulor with new rubber you can probably buy the car with the panasport but you would have to negotiate with jenna over them (she is quite attached to them) she will sell the car but not the rims ( thats my girl)

Ahhh that was were i was going with that as my next..

would she sell lol.. i saw the for sale post for them awhile back when i was digging through looking for something.

still wont sell???

cheers for the info man..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...