Jump to content
SAU Community

Recommended Posts

Guys, R33s have the battery in the boot, R32s have it in the engine bay.

moo_r32, You don't really have any other choice but to run the power wire from the engine bay to your boot. Keep it on the other side of the car as your RCAs to reduce interference. Make sure you fuse the power cable not more than 30cm from your battery terminal too.

33s and 34s have em in the boot but 32s have em in the engine bay

I moved mine to the boot in my 32 wasnt too hard just have to run a very large cable under the car from the bonnet to the boot

you can get kits which come with all the terminals, battery box and cable etc

if you dont want to move the battery the best place to run the cable is down the drivers side under the carpet dont run it under the plastic moulding run it along the floor

33s and 34s have em in the boot but 32s have em in the engine bay

I moved mine to the boot in my 32 wasnt too hard just have to run a very large cable under the car from the bonnet to the boot

you can get kits which come with all the terminals, battery box and cable etc

if you dont want to move the battery the best place to run the cable is down the drivers side under the carpet dont run it under the plastic moulding run it along the floor

R34's have the battery in the engine bay too - well, mine is anyway....

  • 3 months later...

Yeah battery placement is weird, my SII R33 Sedan has the battery at the front drivers side of engine bay, and overflow bottle on the right hand side near air filter box. Im gonna have to run a power cable to my boot soon as well. Although with no battery in the boot that little shelf makes a nice spot to mount an amp and sub.

Running an earth back to the battery or to the chassi is 6 of one and half a dozen of the other. Easier to use the chassis but for mine I ran one from the battery. The biggest hassel is getting it past the engine bay firewall. Took me ages and a few attempts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...