Jump to content
SAU Community

Recommended Posts

Guys, R33s have the battery in the boot, R32s have it in the engine bay.

moo_r32, You don't really have any other choice but to run the power wire from the engine bay to your boot. Keep it on the other side of the car as your RCAs to reduce interference. Make sure you fuse the power cable not more than 30cm from your battery terminal too.

33s and 34s have em in the boot but 32s have em in the engine bay

I moved mine to the boot in my 32 wasnt too hard just have to run a very large cable under the car from the bonnet to the boot

you can get kits which come with all the terminals, battery box and cable etc

if you dont want to move the battery the best place to run the cable is down the drivers side under the carpet dont run it under the plastic moulding run it along the floor

33s and 34s have em in the boot but 32s have em in the engine bay

I moved mine to the boot in my 32 wasnt too hard just have to run a very large cable under the car from the bonnet to the boot

you can get kits which come with all the terminals, battery box and cable etc

if you dont want to move the battery the best place to run the cable is down the drivers side under the carpet dont run it under the plastic moulding run it along the floor

R34's have the battery in the engine bay too - well, mine is anyway....

  • 3 months later...

Yeah battery placement is weird, my SII R33 Sedan has the battery at the front drivers side of engine bay, and overflow bottle on the right hand side near air filter box. Im gonna have to run a power cable to my boot soon as well. Although with no battery in the boot that little shelf makes a nice spot to mount an amp and sub.

Running an earth back to the battery or to the chassi is 6 of one and half a dozen of the other. Easier to use the chassis but for mine I ran one from the battery. The biggest hassel is getting it past the engine bay firewall. Took me ages and a few attempts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...