Jump to content
SAU Community

Recommended Posts

764954-japan-quake-disaster-nuclear-accident-export.jpg

Radiation: A Nissan worker checks radiation levels on a "Nissan GT-R" sports car produced in Japan at its Oppama factory in Yokosuka, some 40-kilometre south of Tokyo. Picture: Toshifumi Kitamura Source: AFP

  • First test of non-food imports from Japan
  • Fears used cars will contain radiation
  • Pressure from dock workers resulted in tests

A BOATLOAD of 800 cars arriving in Sydney from Japan will be tested for radiation by the nuclear watchdog after other Japanese vehicles were found to be radioactive.

The move is the first Australian test of non-food exports from the fallout-ravaged Asian nation, and marks a turn-around in position for the Australian Radiation Protection and Nuclear Safety Agency.

Officials from ARPANSA will board the cargo ship Trans Future 7 when it docks in Port Kembla on Thursday, after picking up 700 Toyotas and 100 other cars from the Japanese port of Yokohama.

Thirty of those vehicles are used cars, which the maritime union fears could have been in areas affected by the March earthquake and tsunami that damaged nuclear reactors along the Japanese east coast.

The officials will use hand-held radiation detectors and will also take surface samples from spots where people in Japan could have touched the vehicles

Previously, the agency had said such tests were unnecessary. However, after intense pressure from dock workers and the discovery in Chile of low levels of radioactivity in cars shipped from Yokohama, ARPANSA said it will conduct the tests to reassure stevedores.

The Maritime Union of Australia said the decision was a win for both workers and the general public.

"Any risk of radiation is too big to take," Assistant Secretary Warren Smith said.

"Workers and consumers come into direct contact with these cars.

"We know from the tragedy in Japan that people are feeling the effects of radiation hundreds of kilometres away from the destroyed nuclear plant. We can't take the risk of contaminating workers."

ARPANSA's acting head of Radiation Health Peter Johnston said the agency did not expect levels of radioactivity but was taking the measure as a precaution.

"We're not expecting to find anything but what we're discussing at the moment is to go on to the ship and monitor a few vehicles before they unload, really to provide reassurance to dock workers," he said. "We'll have a range of different instruments."

Professor Johnston said that food remained the highest risk area for radioactive contamination and ARPANSA was also continuing to test exports from affected areas.

So far only one sample has been found to be radioactive, and that was below the international safety standard.

Read more: http://www.news.com.au/national/fears-of-radioactive-cars-in-australia/story-e6frfkvr-1226079150195#ixzz1PsIy75Y8

Link to comment
https://www.sau.com.au/forums/topic/368481-interesting-news-article/
Share on other sites

Dono weather i should be scared or not. What happens if the car does test positive? I can pretty much kiss $50,000 goodbye and never see them again as i highly doubt any of those costs would be reimbursed. Not good =/

depends what readings they get and what distance. anything upto about 100 mili severts at surface will be fine and a good wash will get rid of any resadue. i work with radiation everyday and people just go into panic mode without knowing or understanding the full details.

I wouldnt be worried and would quite happily drive and own a car that showed any of reading

depends what readings they get and what distance. anything upto about 100 mili severts at surface will be fine and a good wash will get rid of any resadue. i work with radiation everyday and people just go into panic mode without knowing or understanding the full details.

I wouldnt be worried and would quite happily drive and own a car that showed any of reading

read a bit about radiation. the dose has to be huge and concentrated to really do some damage

I hope mine copped a little dose of radiation before it left Japan a month ago. With a little luck it might slowly mutate and sprout twin turbos and two extra exhausts within a few years.......or just go green like the hulk!?

yeah I read this yesterday in the paper. about the only thing I know for sure is it will be a small inconvenience for all those small importers with a car on this voyage of trans future 7. toyota will get their cars out no problem. they are starved for stock atm and no way will they let this stuff sit there too long. at most they might order a decontamination wash of all the vehicles which'll raise a bit more cash for AAT. I wouldn't be too worried, just expect your car to be redlined and held a few extra days at the wharf.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...