Jump to content
SAU Community

Recommended Posts

righto kids these are now ready to ship

ill put up a list of deposits an pm the people who are waiting.

there are one or two spares so pm me if you want a set

(sorry for the delay, has been out of my hands)

so lets get these out and give some 32's some camber

righto ladies

these are the payments i have for these ( the remaining amount is 300 + 20 shipping in aus)

ill pm each person who has deposited just to remind them

gabbo32gtr $250 13/6/11

ben Mani $250 26/7/11

spiro m $250 27/7/11

tristiian badcock $250 1/9/11

kisuu buta $250 2/9/11

Edward Lendru $250 13/2/12

me time 2

I have ten ordered not including mine so if ou want a set there are 4 available

pete

pm sent

(sorry for he delay... realying on 3rd parties suck. just ask anyone who uses contractors)

Righto, I've sent off address details for the following guys so their camber arms can be sent:

infamous_t

lwells

spirom

Anyone else I'm either waiting on final funds and/or addresses etc... check your pms

Also pics for those who wanted them:

camberarms2.jpg

camberarms.jpg

prolly one or two sets left now be quick if you want em

  • 2 weeks later...

geez fatz, never got a pm from ya to say they were ready. will deposit last 320 this weekend and shoot you through my address

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...