Jump to content
SAU Community

Recommended Posts

hi all up for sale.

reason for sale: doing v6 conversion and no longer need

western sydney, pick up preferd.

RB26 ENGINE. COMPLETE.(minus rail) and coils)

trust pistons and rings

par billet rods

r33 crank

tomie 88mm hg 1.2mm

jun oil pump

modified r33 balancer (for external crank sensor, optional use)

tomie pon cams

head rebuilt with bronze ex guides and tomie restrictor

os cam gears

autronic disc cas (can supply oem)

powder coated metalic green covers with extra baffels

traveled 30k approx.

was making 376kw@4 with t04z.

$7k quick sale

AUTRONIC SMC HC WITH 500R CDI ecu

with rb26 loom, high current injector drivers and auto tune 500r cdi ignition included (can supply matching cas if needed) mazda 13b turbs twin post coils x3 (3" spark!)

$1750 ono ecu and cdi and coils

TOMIE +1mm cam buckets

$500 little use

APEXI 280 11.5 VMAX RB26 CAMS

30MM base circle (use buckets as above)

$500 little use

SUPERTECH DUAL VALVE SPRINGS WITH Ti RETAINERS

brand new in box

$650

viton valve stem seals

$100

spare rb26 head. complete un modified from standard engine( has not been milled. virgin)

$700

NISMO OIL COOLER CORE (integrated into nismo modified (smaller) ac condensor)

$500

complete bnr32 rear cradle with nismo upgrade lsd

$1000

4.375 front diff gears and rear diff (gts-4)

$500

HKS REMOTE FILTER/THERMOSTATE with oil cooler serk 25 row

$450

PWR 42MM TWIN PASS RADIATOR WITH NASCAR SPAL FAN

$1000

TRUST DRAG COOLER 100MM (ABIT ROUGH)

$350

NPC OS GIKEN TWIN PLATE CLUTCH

needs 1 new friction disc (faulty spline)

$300

PPG 5 SPEED GTR COMPLETE GEARBOX (with transfer)

billet main shaft,hollinger input shaft, all options,new S3 r33 case with new bearings and seals c's short shifter traveled 2000km approx

(input shaft spline same a gm 26. os,orc and many others do hollinger "center hubs" to fit the big spline) i used a r3c os giken

$8K ono

NISMO slave cyl

$100

BOSCH 363 injectors. (v8 supercar 98ron injectors) low impedance 600cc 14mm "o" ring

x6

$300

SARD FPR

$100

t4 stainless hi mount manifold flanged for 42mm garrett wastegate. twin entry t4 design no cracks, can fit gt42 size turbo (had bw s372 mounted)

has "quick spool" valve built in (easily removed)

$200

2X INDYCAR INCONEL/TITANIUM 45MM WASTE GATES (60mm valve 45 inlet)

investmant cast inconel bodies with titanuim floating poppet valve super light, max flow very little use, with new reid washbon exhausts cnc inlet flanges for 2" od tube and quick release vband clamps (oval angled outlet 2"x2.5")

$1250 pair

BULLSEYE POWER s372R turbo (bw sx400 sx4 72mm) 0.90 t4 twin entry 4" out v band. clamp and pipe adapter included has optional race comp cover fitted

1000hp turbo etc etc similar spool to gt4294 with more power than gt4202 can run 70psi boost (extract from borg warner)

BRAND NEW!

$2300 ono

all prices are neg, but low ball offers will be ignored.

cheers!

dave

pics up soon.

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Sorry but I am probably not going to buy them but those wastegates sound pretty amazing. Do you have a spare IHI RX8 turbo to go with one of the wastegates? ;)

Good luck with sale!

just so we are all on the same page, its the front crownwheel and pinion with the spacer. and a rear diff with pinion installed and the ring gear with no center. (use your centers for both diffs)

hks oil filter reloctator with thermostate and serk 25 row oil cooler (COMES WITH RB20 OIL FILTER BLOCK TO REMOVE GHAY FACTORY OIL COOLER)

post-19586-0-88009900-1308824695_thumb.jpg

sard fpr

post-19586-0-70772600-1308824733_thumb.jpg

input shaft or ppg straight cut 5 speed. holinger (still in car)

post-19586-0-68260700-1308824834_thumb.jpg

pic of engine in car

post-19586-0-20974500-1308824988_thumb.jpg

DIBLETS (the stig)

post-19586-0-44213000-1308825098_thumb.jpg

MORE PICS TOMORROW (need to cook dinner...)

front and rear diff may be up again.

just reminding that its a complete ready to bolt in rear r32gtr diff with shimmed 2 way (nismo upgrade kit) and loose front crownwheel and pinion with matching spacer

pics of nismo oil cooler/condensor and engine up tomorrow.

engine was built by me and has the folowing clearances for those intersted.

piston to bore: 2 thou

big ends: 1.7 thou

mains: 2 thou

cold oil pressure 7.5 bar. 2.5 hot @ idle

using full synthetic penrite 15w40 (sponsed out race cars)

PS. ENGINE HAS A 9 LITER BAFFELED SUMP. AND STOCK FRONT DIFF.

post-19586-0-37043100-1308997782_thumb.jpgDRY SUMP SETUP FOR RB26 FOR SALE!!! $4500 ono all top quality gear.

5 STAGE DAILEY ENG ROOTS SCAVANGE built in scavenge return manifold ans pressure relief.

-16 in to pump pressure -12 out

4x-12 into scavenge 2x -16 wiggins out. included are a wiggins clamp and some very nice -16 hs79 hose. ($230/m new!) rated to 1000psi teflon nomex/kevlar the best hose money can buy.

a 3 gallon patterson tank and a set of -12 scavenge pre filters (not pictured)

ross race series rb26 balancer r33gtr with drive mandrel for pump. and the belt

and the bracket. mounts where a/c goes.

post-19586-0-53098600-1308996741_thumb.jpgpost-19586-0-29415200-1308996982_thumb.jpgpost-19586-0-30590000-1308997088_thumb.jpgpost-19586-0-64572100-1308997259_thumb.jpg

post-19586-0-34788200-1308997317_thumb.jpgpost-19586-0-38400900-1308997380_thumb.jpgpost-19586-0-98290300-1308997714_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...