Jump to content
SAU Community

Recommended Posts

Hey guys,

Need to reintroduce myself, I was initially a R33 owner about 4 years ago, then did the whole Toyota scene, and now I'm back with a recently co-purchased 1999 RS4 S.. 5 spd RB25DET Neo etc..

I say co-purchased, as it is my dads who will be retiring very soon, and will use it until he decides to leave Australia.. then it will be mine, ALL MINNNEE!!

So the car came with a few extras which surprised me considering its imported.. BOV, exhaust, boost guage - I would have thought those would have been stripped - aftermarket H/U (japanese), r-spec turbo timer, 2 sets of Pioneer TV antennae's, and has these other funky gadget which I'll try take photos of because I don't know what is. Its located behind the back seat.. and it has WARN, FULL and CURRENT

More to come..

img6138w800h533.jpg

img6145w800h533.jpg

img6191w800h533.jpg

Link to comment
https://www.sau.com.au/forums/topic/368774-act-new-stagea-owner/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

damn i cant wait to see this in canberra.

headlights are weird with the amber line though the bottom, havent seen them before. has a series 2 N/A grille, dolphin eyelids and rear bar and side skirts, series 2 autech rs260 front bar, ganador mirrors. one tidy RS4-S dude!

Thanks dudes..

+1 for bigger rims. Not sure wat style I want.. currently photoshopping to pass time.

Should I do the whole VIP style? Or go something a bit more Tempe tyres? Haha.. this will be interesting.

a quick photo of that thing in the back.. I tried googling it.. but couldn't find anything..

post-34609-0-01657000-1308900725_thumb.jpg

edit: actually, I think it may be the immobilizer... i found the the actual 'siren' thingo.. under the drivers seat..

Edited by S T A R 3 3

Thanks dudes..

+1 for bigger rims. Not sure wat style I want.. currently photoshopping to pass time.

Should I do the whole VIP style? Or go something a bit more Tempe tyres? Haha.. this will be interesting.

Black RE30's with polished lip would look nice I reckon :)

i think thats a car alarm dude, hornet make alarms, they have WARN mode and CURRENT sensor depending on model?

haha yeah, i just figure that out.. dont know why it didnt occur to me straight away. I think I was still in giddy mode and was looking forward to never before seen Japanese gizmo's.

Cheers tho!

hey guys,

looking to create a checklist of mods for the stagea. I'm still getting my head around the whole tuning and mods thing, so please feel free to ask questions if I'm not clear on what I'm saying.. lol

Currently, exhaust system has been fitted. I havent had a chance to jack the car up and have look at it.. but definitely one of the MUST DO things with all imports.

Boost controller (GFB G-Force ~$350)

FMIC (HDI - I see a few of u guys have these installed without any drama's?

BC coilovers & rims

Nistune ECU w/ z32 AFM (?). I'm not looking to break any records, but looking to have some sort of freedom to tune. As a daily, will a z32 really be necessary?

Again, feel free to suggest, critique, lol at my list..

<3

I was in the same position as you a few months back. My car already had a Nismo 2 1/2 inch cat back system, but after asking around and reading the info on here I went with a 3 inch system from the turbo back with a high flow cat, Nistune, fuel pump, and a turbo tech boost controller. I put the boost up to 10psi and got 204kw on the dyno with 494kw torque. I talked to my tuner about getting a z32, and he said there was no point until I started chasing more power as the stock one could handle it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...