Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic


PARTS CLEAN OUT SALE, NEW LEASE STARTS IN 2 MONTHS. NEED TO SELL!

PLEASE MAKE AN OFFER! DON'T WANT TO MOVE IT ALL AGAIN!

***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** $200 posted (If you find cheaper will beat!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######

post-47150-0-88418500-1393305472_thumb.jpgpost-47150-0-75426400-1393305520_thumb.jpg


***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating) ***** $140

post-47150-0-67717600-1393306473_thumb.jpgpost-47150-0-18775200-1393306496_thumb.jpg

***** Offset steering rack spacers, great for extra steering lock when drifting (Have been taken from an R32 gtst).***** $50

post-47150-0-64843000-1393306523_thumb.jpg

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage. **** $50 for both!

post-47150-0-67078700-1393306605_thumb.jpgpost-47150-0-61720300-1393306589_thumb.jpgpost-47150-0-86888800-1393306645_thumb.jpg

***** Varex (oval type) rear muffler with controller and remote. Used for 6 months. Has rear flange. Will need new mounts welded on for indivdual car. **** $250


post-47150-0-74948300-1393305543_thumb.jpgpost-47150-0-69807900-1393305569_thumb.jpgpost-47150-0-70268900-1393305584_thumb.jpgpost-47150-0-95107200-1393308043_thumb.jpg

***** Apexi Power FC to suit S1. No commander. (Tuned for 35R and 550cc injectors, 380whp) WAS $800 now $600

post-47150-0-60465900-1393306721_thumb.jpgpost-47150-0-27372500-1393306840_thumb.jpg

***** Z32 80mm Airflow meter (with free apexi air filter) WAS $160 NOW $100

post-47150-0-33686900-1393306977_thumb.jpgpost-47150-0-83531300-1393307027_thumb.jpg

***** Apexi air filter, used condition ***** $10 or Free with AFM

post-47150-0-54993700-1393305494_thumb.jpg

***** Nismo/Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500 NOW $400

post-47150-0-54493600-1393307945_thumb.jpgpost-47150-0-49619600-1393307995_thumb.jpgpost-47150-0-25859600-1393307977_thumb.jpg

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $50

post-47150-0-20715400-1393309129_thumb.jpg (Pic stolen from old thread, can provide new pic)

*****Trust/GReddy RB25 stainless manifold. ***** $300 NOW $150

post-47150-0-54089400-1393304567_thumb.jpgpost-47150-0-48945500-1393304932_thumb.jpgpost-47150-0-45716600-1393304970_thumb.jpg

***** Oil Cooler kit from Old HEL group buy. (Missing the Setrab core). Comes with oil filter adapter, braided lines and fittings. ****** $90

post-47150-0-47007900-1393305983_thumb.jpgpost-47150-0-89035600-1393307072_thumb.jpgpost-47150-0-47502000-1393307103_thumb.jpgpost-47150-0-81840100-1393307125_thumb.jpg

***** Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. ***** $10 Free with oil cooler kit!

(Could be used with above kit with adapters for smaller fittings).

post-47150-0-19480200-1393307185_thumb.jpg

***** Alloy pulley kit for RB25, (no longer required for my vehicle) Never fitted ***** $80 ONO

post-47150-0-37879500-1393307681_thumb.jpg

***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** $50

post-47150-0-01937900-1393305950_thumb.jpg

***** Riverside Mesh wheels (pair), 16x8 +1. No tyres ***** $280 $200

post-47150-0-14146400-1393307324_thumb.jpgpost-47150-0-07901600-1393307382_thumb.jpg

***** GK TECH Brass shifter bush, (never taken out of its packet) ***** $10 posted

post-47150-0-87685900-1393307419_thumb.jpg

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. FREE

(Photo available on request)

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

post-47150-0-99747400-1393305409_thumb.jpg

Edited by Kisuu_Buta
  • 2 weeks later...

I have reduced the prices again! (I'm starting to feel like a rug shop...)

Still hoping to find some happy new owners for these parts!!!!

Riverside Meshies SOLD!!!


***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** WAS $200 NOW $150 posted (If you find cheaper will beat!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######


***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating due to the welding) ***** WAS $140 NOW $120

***** Offset steering rack spacers, great for extra steering lock when drifting (Have been taken from an R32 gtst).***** WAS $50 NOW $40

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage. **** STILL $50 for both!


***** Varex (oval type) rear muffler with controller and remote. Used for 6 months. Has rear flange. Will need new mounts welded on for indivdual car. **** WAS $250 NOW $200


***** Apexi Power FC to suit S1. No commander. (Tuned for 35R and 550cc injectors, 380whp) WAS $800 now $550

***** Z32 80mm Airflow meter (with free apexi air filter) WAS $160 NOW $80

***** Apexi air filter, used condition ***** $10 or Free with AFM

***** Nismo/Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500 NOW $350

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $40

*****Trust/GReddy RB25 stainless manifold. ***** WAS $300 STILL $150

***** Oil Cooler kit from Old HEL group buy. (Missing the Setrab core). Comes with oil filter adapter, braided lines and fittings. ****** WAS $90 NOW $80

***** Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. ***** $10 Free with oil cooler kit!

(Could be used with above kit with adapters for smaller fittings).

***** Alloy pulley kit for RB25, (no longer required for my vehicle) Never fitted ***** WAS $80 ONO NOW $60


***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** LOTS OF INTEREST STILL $50 TO (SAU MEMBERS)

***** Riverside Mesh wheels (pair), 16x8 +1. No tyres ***** $280 $200 SOLD

***** GK TECH Brass shifter bush, (never taken out of its packet) ***** STILL $10 posted

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. STILL FREE

(Photo available on request)

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

  • 2 weeks later...

A few more items have gone, please make offers for anything left!



***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** WAS $200 NOW $150 posted (If you find cheaper will beat!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######


***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating due to the welding) ***** WAS $140 NOW $120

***** Offset steering rack spacers, great for extra steering lock when drifting (Have been taken from an R32 gtst).***** WAS $50 NOW $40

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage. **** STILL $50 for both!


***** Varex (oval type) rear muffler with controller and remote. Used for 6 months. Has rear flange. Will need new mounts welded on for indivdual car. **** WAS $250 NOW $200


***** Apexi Power FC to suit S1. No commander. (Tuned for 35R and 550cc injectors, 380whp) WAS $800 now $550

***** Z32 80mm Airflow meter (with free apexi air filter) SOLD

***** Apexi air filter, used condition ***** SOLD

***** Nismo/Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500 NOW $350

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $40

*****Trust/GReddy RB25 stainless manifold. ***** WAS $300 STILL $150

***** Oil Cooler kit from Old HEL group buy. (Missing the Setrab core). Comes with oil filter adapter, braided lines and fittings. ****** SOLD

***** Oil cooler core, 9 Row with dash ten fittings. Came from Trust oil cooler kit. Looks weathered/old. No leaks when removed. ***** SOLD

(Could be used with above kit with adapters for smaller fittings).

***** Alloy pulley kit for RB25, (no longer required for my vehicle) Never fitted ***** WAS $80 ONO NOW $60


***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** LOTS OF INTEREST STILL $50 TO (SAU MEMBERS)

***** Riverside Mesh wheels (pair), 16x8 +1. No tyres ***** SOLD

***** GK TECH Brass shifter bush, (never taken out of its packet) ***** STILL $10 posted

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. STILL FREE

(Photo available on request)

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

Prices lowered again! A few more items have gone, please make offers for anything left!

Photo's can be seen earlier in the thread or through SMS.

***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** WAS $200 NOW $130 posted Happy to seperate front and rear (If you find cheaper price I will beat it!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######


***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating due to the welding) ***** WAS $140 NOW $100

***** Offset steering rack spacers, great for extra steering lock when drifting (Have been taken from an R32 gtst).***** WAS $50 NOW $30

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage. **** STILL $50 for both!

***** Apexi Power FC to suit S1. No commander. (Tuned for 35R and 550cc injectors, 380whp) WAS $800 now $500

***** Nismo/Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500 NOW $300

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $40 ON HOLD

*****Trust/GReddy RB25 stainless manifold. ***** WAS $300 STILL $130

***** Alloy pulley kit for RB25, (no longer required for my vehicle) Never fitted ***** WAS $80 ONO NOW $50


***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** LOTS OF INTEREST, STILL $50 TO (SAU MEMBERS)

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. STILL FREE!

(Photo available on request)

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

  • 3 weeks later...

Have a look. Prices lowered again! Bargains to be had!!!

***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** WAS $200 NOW $80 PICK UP OR $100 posted Happy to seperate front and rear (If you find cheaper price I will beat it!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######

***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating due to the welding) ***** WAS $120 NOW $60

***** Offset steering rack spacers, great for extra steering lock when drifting (Have been taken from an R32 gtst).***** WAS $50 NOW $30

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage. **** NOW $40 for both!

***** Apexi Power FC to suit S1. No commander. (Tuned for 35R and 550cc injectors, 380whp) WAS $800 NOW $450

***** Nismo/Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500 NOW $250

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $20

*****Trust/GReddy RB25 stainless manifold. ***** WAS $300 NOW JUST $100

***** Alloy pulley kit for RB25, (no longer required for my vehicle) Never fitted ***** WAS $80 ONO NOW $20

***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** LOTS OF INTEREST, STILL $50 TO (SAU MEMBERS)

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. STILL FREE!

(Photo available on request)

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

New parts added! Offers still welcome

Postage additional unless agreed otherwise

***** Sparco bonnet pins kit. Un-opened packet ***** $15

post-47150-0-85105900-1399279131_thumb.jpg

***** GK Tech R32 GTST Radiator cooling panel. Never been fitted ***** $50

post-47150-0-86996000-1399279569_thumb.jpgpost-47150-0-52849600-1399279579_thumb.jpg

***** R32 GTR/Gtst/Z32 Rear alloy knuckles. ***** $50/pair

post-47150-0-83954600-1399280339_thumb.jpgpost-47150-0-35724300-1399280360_thumb.jpg

***** R32 GTR copy rear spoiler. Has removable led strip. In fair condition, paint recommended ***** $150

post-47150-0-93911300-1399281748_thumb.jpgpost-47150-0-68757800-1399282159_thumb.jpg

***** Stainless 3 inch dump pipe. Suit RB20/25 turbo. ***** $40

post-47150-0-90149700-1399282451_thumb.jpgpost-47150-0-29263100-1399282477_thumb.jpgpost-47150-0-59595900-1399282499_thumb.jpg

***** Catalytic convertor delete/straight through pipe. 3 Inch mild steel. ***** $25

post-47150-0-24000300-1399283142_thumb.jpg

***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** WAS $200 NOW $80 PICK UP OR $100 posted Happy to seperate front and rear (If you find cheaper price I will beat it!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######

post-47150-0-80359000-1399279619_thumb.jpgpost-47150-0-01899600-1399279686_thumb.jpg


***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating due to the welding) ***** WAS $120 NOW $60

post-47150-0-62246600-1399280484_thumb.jpgpost-47150-0-50208100-1399280513_thumb.jpg

***** Offset steering rack spacers, great for extra steering lock when drifting (Have been taken from an R32 gtst).***** WAS $50 NOW $30

post-47150-0-04636300-1399280547_thumb.jpg

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage. **** NOW $40 for both!

post-47150-0-71734000-1399279792_thumb.jpgpost-47150-0-57653300-1399279811_thumb.jpgpost-47150-0-24091300-1399280148_thumb.jpg

***** Apexi Power FC to suit S1 and 2. No commander. (Was tuned for 35R and 550cc injectors, 380whp) WAS $800 NOW $450

post-47150-0-02606400-1399280691_thumb.jpgpost-47150-0-48168200-1399280863_thumb.jpg

***** Nismo/Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in $500 NOW $250

post-47150-0-98587900-1399280944_thumb.jpgpost-47150-0-93349500-1399280971_thumb.jpgpost-47150-0-26689900-1399281011_thumb.jpg

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $20

post-47150-0-44952500-1399281345_thumb.jpg

***** Trust/GReddy RB25 stainless manifold. ***** WAS $300 NOW JUST $100

post-47150-0-23706900-1399279650_thumb.jpgpost-47150-0-43861300-1399281137_thumb.jpgpost-47150-0-80647100-1399281324_thumb.jpg

***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** $50 TO (SAU MEMBERS)

post-47150-0-54978100-1399279724_thumb.jpgpost-47150-0-89721000-1399280403_thumb.jpgpost-47150-0-47287200-1399280437_thumb.jpgpost-47150-0-92774400-1399280452_thumb.jpg

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. STILL FREE!

post-47150-0-29513200-1399279755_thumb.jpgpost-47150-0-75390100-1399279766_thumb.jpg

***** 10 inch kicker sub in enclosure ***** $25

post-47150-0-28029200-1399282910_thumb.jpg

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

New parts added! Offers still welcome

Postage additional unless agreed otherwise

***** HEL/GK Tech Braided clutch line to suit R32/33 Gtst skyline. Never used ***** $35

***** Sparco bonnet pins kit. Un-opened packet ***** STILL $15

***** GK Tech R32 GTST Radiator cooling panel. Never been fitted ***** WAS $50 NOW $45

***** R32 GTR/Gtst/Z32 Rear alloy knuckles. ***** WAS $50/pair NOW $40

***** R32 GTR copy rear spoiler. Has removable led strip. In fair condition, paint recommended ***** WAS $150 NOW $135

***** Stainless 3 inch dump pipe. Suit RB20/25 turbo. ***** WAS $40 NOW $30

***** Catalytic convertor delete/straight through pipe. 3 Inch mild steel. ***** WAS $25 NOW $20

***** Set of EBC Redstuff Front and Rear pads. (Bought wrong pads for my car. Didn't check on vehicle before returns period expired! My loss is your gain). ***** WAS $200 NOW $80 PICK UP OR $100 posted Happy to seperate front and rear (If you find cheaper price I will beat it!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######

***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating due to the welding) ***** WAS $120 NOW $60

***** Offset steering rack spacers, great for extra steering lock when drifting (Have been taken from an R32 gtst).***** WAS $50 NOW $30

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage.***** NOW $40 for both!

***** Nismo/Sard 550cc side feed injectors. Fitted to RB25 fuel rail. Ready to bolt in ***** $500 NOW $250

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $20

***** Trust/GReddy RB25 stainless manifold. ***** WAS $300 NOW JUST $100

***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** $50 TO (SAU MEMBERS)

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. ***** STILL FREE!

***** 10 inch kicker sub in enclosure ***** $25

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

***** Apexi Power FC to suit S1 and 2. No commander. (Was tuned for 35R and 550cc injectors, 380whp) ***** SOLD!!!

Weekend Price Drop !!!

Pictures earlier in thread. Postage additional, unless agreed otherwise.

***** HEL/GK Tech Braided clutch line to suit R32/33 Gtst skyline. Never used ***** WAS $35 NOW $30

***** Sparco bonnet pins kit. Un-opened packet ***** STILL $15

***** GK Tech R32 GTST Radiator cooling panel. Never been fitted ***** WAS $50 NOW $40

***** R32 GTR/Gtst/Z32 Rear alloy knuckles. ***** WAS $50/pair NOW $30

***** R32 GTR copy rear spoiler. Has removable led strip. In fair condition, paint recommended ***** WAS $150 NOW $120

***** Stainless 3 inch dump pipe. Suit RB20/25 turbo. ***** WAS $40 NOW $20

***** Set of EBC Redstuff Front and Rear pads ***** WAS $200 NOW $80 PICK UP OR $100 posted

Happy to seperate front and rear (If you find cheaper price I will beat it!)

- Front Pad DP3775C suit 350Z non brembo, R32 non turbo, Maxima, Altima, Cube, Juke, Sentra.

- Rear Pads DP3686/2C suits S13 CA18, R34 GT-T non turbo, R32 non turbo.

##### Please double check part number before purchase. ######

***** R33 Lower control arms, have been professionally boxed with dimpled sheet metal. (Require paint/powdercoating due to the welding) ***** WAS $120 NOW $60

***** RB25 Crankshaft and Camshafts. Both from series 1 engine. Used condition, no damage.***** NOW FREE (Will not post)

***** Trust/GReddy RB25 plenum throttle body adapter to suit standard throttle. ***** $20

***** Trust/GReddy RB25 stainless manifold. ***** WAS $300 NOW JUST $100

***** R32 Type M front bumper (white), in fair condition. Has had both corners repaired ***** $50 TO (SAU MEMBERS)

***** 3 inch cat back exhaust for R32 mild steel. Has rear cannon with broken mount, average condition. ***** STILL FREE

***** 10 inch kicker sub in enclosure ***** $25

Contact by PM or SMS 0432227533. Thank you for reading! :yes: :yes: :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...