Jump to content
SAU Community

Recommended Posts

hi all members!

i my facing a new problem, after i change a new turbo (actaully a same type of stock turbo replace a bigger compressor and turbine wheel) the car rpm drop to 300rpm or nearly stall, when i stay on 2500rpm up to 4000 rpm , but if i full throttle its fine, this all happen just after change the turbo, check already with MAF / fuel pressure regulator / spark plug/ and even install emanage ultimate, BOV circulation . do you think the turbo is not suitable with my inlet manifold? compressor stall ?

heard people said is boost cut , but before 0.8 bar also no cut why this time 0.5 bar already cut, they said bcoz bigger compressor wheel, do you think is true?

skyline r34 GTT Auto Trans

emanage ultimate

stock injector

HKS pod

ext wastegate 0.7bar

after market dumb pipe

stock AFM

already check Vacuum leak, fully secure and tight, even change new hose. diagnose no fault code, what if exhaust manifold leak?

after problem occur i install emanage hope can solve but its the same. but my final decision will put back the ori stock turbo, if everything ok, then is the turbo.

i change back to the stock turbo, and the problem solve, the stock turbo is 0.63 AR and new turbo is 0.48 AR , stock is single blade ,new turbo is double blade.

which i think it cause the problem ?

Is your new turbo seized or does it spin easy?

I once had this problem when the turbo could not spin easy.

Also, make sure your compressor housing is not leaking vacuum. The housing has an o-ring where it meets the backing plate.

GL, makasi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...