Jump to content
SAU Community

Recommended Posts

What ever you do do not use any liquids or sprays on it. It is almost certainly fine to use, that rust will come off in the first take off, if you look at brake discs after 2 days of rain and no driving they look similar.

I cant imagine it was for shear, they would just change the bolts, plus it would add absolutely nothing. Im just wondering if theres another use, being as the bolts basically align it.

confused

I cant see anyother reason why something would be doweled, other then to align and reduce shear loading. Bolts arent really meant to align or take significant side loading, they are pretty well only meant to be used in a tensile stressed manner and in some circumstances compressed.

What do you mean by they would just change the bolts?

Shear forces are taken by the surface to surface friction of the flywheel against the flange on the crank. That friction is created by the normal force, which is provided by the bolts pulling into tension. Stronger bolts = more torque capacity = more tension = more normal force = more friction = more tangential load capacity. Unless of course you are limited by the strength of the threads in the holes in the crank, which no-one ever seems to think about when just randomly upgrading bolts.

oh so it can go on anyway i thought it might have to on a certain way. will the dowel on the rb25det crank come out or will i have to grind it off just obvisouly the rb30 flywheel not going to fit iff a dowel is there

I think you mean an alternating bolt PCD? As in not evenly spaced?

Alot of flywheels are like this, idea being to keep the flywheel in the same position on the crank as when it was balanced from factory. Just keep turning the flywheel on the crank until it looks like it roughly lines up, fit the bolts say 5-6 turns in, if they all go in easy, you're set, if 2 or three are tight or don't start/line up, turn it to the next spot the holes line up.

Does that help?

  • Like 1

Shear forces are taken by the surface to surface friction of the flywheel against the flange on the crank. That friction is created by the normal force, which is provided by the bolts pulling into tension. Stronger bolts = more torque capacity = more tension = more normal force = more friction = more tangential load capacity. Unless of course you are limited by the strength of the threads in the holes in the crank, which no-one ever seems to think about when just randomly upgrading bolts.

Similar to wheel studs/nuts don't take the torque of the driven hub, the friction generated between the hub and wheel drive it?

  • 13 years later...

Hey I know this is an old thread but couldn't find any others relating to this topic I'm currently building a vl drift car has stock non turbo rb30 have a rb20 gearbox for it was just wondering if I'll need to get a rb20 flywheel and clutch or am I able to still run a rb30 flywheel and clutch cheers heaps 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...