Jump to content
SAU Community

  

72 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

I have found that if I do put v-power in the Gtr feels a little docile, but I have also since found that the exhaust cam was buggered and timing was all over the place.. The clincher for me was a mates 180, he is running about 280rwkw on standard cams and valve train, and is one of those freaky natural mechanics who just gets cars, he has found that v-power tends to foul plugs more than anything else, there were 1 or 2 other issues, but I am not sure what they were, so I won't make claims. It is always ultimate for me

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

As has already been said... 98 is 98 and the most likely reason a car loses perfomance on a 98 fuel is it's probably stale from sitting in the servo's tanks for longer than usual simply because there isn't enough people using it quick enough. If you buy your 98 fuel from a servo that would sell a lot of it you can bet it will be as good as any other servo's 98 fuel. It is hard to know which servos go through enough 98 to have to keep topping up with fresh fuel but thats where it's hit and miss.

ahh, there's no crap to suck in, there's a sock that covers the fuel pump no? and either way, the pump is at the bottom, so crap surrounds the pump whether at high or low levels.

but running the fuel level low might introduce bubbles into the system

Topic has been discussed a billion times.

I would say the best fuel would be any 98RON fuel from a Caltex/BP/Shell/Mobil petrol station that is usually very busy; which means fuel supply has a high turnover rate.

Can't remember where i read it, but someone mentioned BP and another brand of petrol comes from the same refinery.

Edited by sloutch

you will be sucking crap from the bottom of the tank no matter what, it's just that when the fuel level is lower the conecntration of crap is higher, that said, if you run your tank low a few times in a row then you will have sucked up a fair bit of crap and most of it will end up in your fuel filter, so it won't be so much of an issue down the track. that said, everytime you fill up you would also stir up any crap at the bottom of the tank and to a lesser extent this also happens when you drive over rough roads.

I always get Caltex 98, but only because it's the most convenient for me to get to.

To be honest... I've tried 95 and 98 octane from several different retailers and not really noticed any difference in performance.

george, you do realise you a wasting more fuel driving around?

Of course, but being a cheap arse Asian every time if I do go to a further away station I did the math using my car's average fuel consumption (12.5 - 13.5L/100km), the extra fuel it will use going the extra kms to that station compared to the closet one, the estimate amount of fuel I'll be putting in and the extra cost minus the difference in fuel price between the stations & overall if there is still a net saving I will go, otherwise I will go to my usual Caltex near Osborne Park.

BTW, I not sure if the other states have it, but the WA government have fuel watch website where it lists all the fuel prices for today & tomorrow so I use that to get all the prices of the main servos in my area before I do the math.

the missu and I kept having an argument over fuel in her honda, i kept telling her to put bp ultimate in it but she doesnt want to listen and keeps putting 91 or e10 cause its cheap and aparently all the same, so i made her do a little test..

Filled it up run till the light come on..

BP ultimate 550 kms on i think was 55l..

E10 did about 450km for the 55l...

With the price difference in the 2 km per dollar was almost identical didnt bother testing 91 yet. Cause i dont use it but i will do that test next for curiosity sake but i expect to get around 500km

But it just goes to show there is no reason not to run premium fuels as the extra mileage makes up for the extra cost and buying a fuel on price alone is naive..

i actually prefer to run e10 in her car for its cleansing properties but if I take a long trip I use Ultimate for the extra mileage...but it really doesnt matter..I would use BP all the time cause it definately makes more power but that means argueing with a woman so I settle for e10, i dont drive the thing so who cares

Of course these tests have nothing to do with power..for power In my 33 I believe BP ultimate is the best but I do like Vpower as well it feels snappier and more livelyy under throttle though probably not as fast as BP..

the missu and I kept having an argument over fuel in her honda, i kept telling her to put bp ultimate in it but she doesnt want to listen and keeps putting 91 or e10 cause its cheap and aparently all the same, so i made her do a little test..

Filled it up run till the light come on..

BP ultimate 550 kms on i think was 55l..

E10 did about 450km for the 55l...

With the price difference in the 2 km per dollar was almost identical didnt bother testing 91 yet. Cause i dont use it but i will do that test next for curiosity sake but i expect to get around 500km

But it just goes to show there is no reason not to run premium fuels as the extra mileage makes up for the extra cost and buying a fuel on price alone is naive..

i actually prefer to run e10 in her car for its cleansing properties but if I take a long trip I use Ultimate for the extra mileage...but it really doesnt matter..I would use BP all the time cause it definately makes more power but that means argueing with a woman so I settle for e10, i dont drive the thing so who cares

Of course these tests have nothing to do with power..for power In my 33 I believe BP ultimate is the best but I do like Vpower as well it feels snappier and more livelyy under throttle though probably not as fast as BP..

i did a similar test in the missus SSS. this wasn't just 1 tank either. i ran each different fuel for a few months so that i could rule out any possibly differences from driving style, terrain or trip type, because basing your results over 1 tank of fuel isn't a good idea and could see you wasting a lot of money for no reason in the long run. this was based on 2 different 98 fuels, 2 different e10's and 1 91 octane. the difference between them all was much less than 1L/100kms. i've done similar tests in other cars i've owned, but generally only for a few tanks rather than for a few months, and always had similar results. with the price difference being about 10% and the fuel savings generally being below 5%, it isn't worth it in my situation.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...