Jump to content
SAU Community

Recommended Posts

My mate at the compliance shop is helping to fit it as he does it fairly regularly and knows the tricks.

i bet he does it regularly to many cars other than an M35. wait till he tells you he has given up :P

anyway the dump looks good!. its gonna help the turbo breathe!

Edited by zei20l
  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Well considering he has to change the dump and front pipes with Australian complied cats for the compliance process, I think it is.

Not sure is the workshops actually do this in other states as they should be!

Edited by slippylotion

Well considering he has to change the dump and front pipes with Australian complied cats for the compliance process, I think it is.

Not sure is the workshops actually do this in other states as they should be!

not for the dump cat. just because its not approved by our Regulations desnt mean they get rid of it. just means they'll put another cat which IS approved somewhere in the front pipe. not having a go, just hope your not expecting the world from compliance lol

Having seen what gets replaced I know what he does. It is a dump and front in one with new cats in it. Not just replacing the front pipe, both get replaced for compliance. This must be done for compliance. If the workshops don't and they get a surprise audit on the car (it happens Ive been at his workshop when the inspector was there) there will be trouble. Ill get a pic of the set up today while Im there.

Edited by slippylotion

IMO the dump pipe is not that hard to do.....it's just knowing how to do it.

I'm not a mechanic and I figured it out....just took a little longer the first time.....but there are imo a couple of little tricks which make it a lot easier....and becasue that dump pipe is so similar to Scott's imo it should not be a hassle.

Edited by Jetwreck

Having seen what gets replaced I know what he does. It is a dump and front in one with new cats in it. Not just replacing the front pipe, both get replaced for compliance. This must be done for compliance. If the workshops don't and they get a surprise audit on the car (it happens Ive been at his workshop when the inspector was there) there will be trouble. Ill get a pic of the set up today while Im there.

get a pic coz if hes doing that for you its top work!

ask him not to put a cat in the dump lol

get a pic coz if hes doing that for you its top work!

ask him not to put a cat in the dump lol

Once he has fitted the compliance dump/front with cats and the car has gone for it's ID inspection we are then fitting the s/steel dump (no cat) and s/steel front pipe (200cpsi cat) to the car. Hopefully it will go for ID inspection by the end of this week.

A pic of the dump is in this thread on first page. It's 3" dump and front but ha e to keep the stock cat back. The wife won't let me fit a cat back to it, it has to stay quiet.

I'm just trying to do as many mods as I can (without her knowing) to improve low and mid torque as im not aloud to modify anything else. It's a sad life, lol

Yeah normally I go buy something with out her knowing, get it home and un pack it and set it up, then it's too late to return. I'm lucky to be getting away with a set of Tanabe coilovers, she's not happy about that. I told her the stock shocks are shagged.

A pic of the dump is in this thread on first page. It's 3" dump and front but ha e to keep the stock cat back. The wife won't let me fit a cat back to it, it has to stay quiet.

I'm just trying to do as many mods as I can (without her knowing) to improve low and mid torque as im not aloud to modify anything else. It's a sad life, lol

Just get the Blitz NUR.

Same volume as stock (82dB) whereas all others are 88dB+.

Yes, but since the reason stated was "noise", I figured that the Blitz would be more suitable.

not trying to get into an argument with you.

but the size of exhaust i think would be just as noticable to his wife.

fujitsubo sort of looks stock, and is quiet. and cheap. win/win/win

Just get the Blitz NUR.

Same volume as stock (82dB) whereas all others are 88dB+.

Actually we all reckon the overall noise levels went down with the Blitz system. Intake noise was reduced heaps, so the in cabin levels were much quieter, at least whilst cruising. Even when giving it a bit, the noise is more pleasant, less Dyson more, erm, car.

But I agree with Aaron, the tail pipe look too big - & my wife wasn't too pleased at first but is over it now lol. I still get a bit embarrased driving it around sometimes as I'm more into stealth, tho my 14yo son thinks it's too small.

The Fujitsubo would be a good compromise between stockish looks & not too much more noise. I wish I had your outlet on my exhaust.

Actually we all reckon the overall noise levels went down with the Blitz system. Intake noise was reduced heaps, so the in cabin levels were much quieter, at least whilst cruising. Even when giving it a bit, the noise is more pleasant, less Dyson more, erm, car.

But I agree with Aaron, the tail pipe look too big - & my wife wasn't too pleased at first but is over it now lol. I still get a bit embarrased driving it around sometimes as I'm more into stealth, tho my 14yo son thinks it's too small.

The Fujitsubo would be a good compromise between stockish looks & not too much more noise. I wish I had your outlet on my exhaust.

the kaki R I went with was a win for me.

suprisingly not TOO loud, free flowing, and after taking the gay tip cover off, it came up awesome

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...