Jump to content
SAU Community

Does 250T Rs Four Have An Lsd? Changing All Oils During Service

slippylotion
 Share

Recommended Posts

slippylotion Mentor

slippylotion

Posted
Posted (edited)

Hey

I finally seen my NM35 today at my mates compliance shop. Very happy with it. Im going to start servicing it tomorrow and Im trying to sort out what oils it needs.

Ive been searching through all the threads on here to check what weight oils I need but its very unclear and messy in the threads. I think the list below is correct, can someone let me know what weights are? Dont need brands, thanks.

Engine: 5w-40

Oil filter: NIssan

Front diff: 75w-90 GL4?

Rear diff: 80w-90 GL5? for LSD. Also not sure if it has LSD or not, I assume the weight will differ between the two? If so what are the correct weights for either LSD or NON LSD?

Transfer case: Matic J

Trans: Matic J

Attesa: ?

Brakes: DOT 4

Coolant: Nissan

Also I rang Nissan today for a price on the passenger cam cover seal, its ~$30 and 3 weeks from Japan. Anyone know who might have them in stock now?

Thought I would just do the gasket at the same time as the spark plugs to save doing it later down the track if needed.

If there is anything else I have missed please let me know.

Cheers guys

Edited by slippylotion
bigkevracer Grand Master

bigkevracer

Posted
Posted

If it has an LSD it needs an LSD additive in the diff oil. I'm pretty sure if it has HICAS it has an LSD.

I used the same weight in the front and rear diffs, think it was 75w90, and the same oil in the transfer case and trans. I believe you can use the same in the ATTESSA and power steering too (I never changed it).

I went 10w40 for the engine, but close enough. It's all close to personal preference.

Filter is the same as a 350Z... that's been covered many, many times.

Funnily enough, I called Valvoline's info line, and they had NM35 Stageas on file, knew all about them, and knew all about the different oils and fluids.

There is a thread which makes this clear, it's just the brand that varies. Valvoline and I think Nulon make a Matic J equivalent if you can't get the Nissan stuff. I paid about $120ish for a 20L drum.

slippylotion Mentor

slippylotion

Posted
  • Author
Posted

If it has an LSD it needs an LSD additive in the diff oil. I'm pretty sure if it has HICAS it has an LSD.

I used the same weight in the front and rear diffs, think it was 75w90, and the same oil in the transfer case and trans. I believe you can use the same in the ATTESSA and power steering too (I never changed it).

I went 10w40 for the engine, but close enough. It's all close to personal preference.

Filter is the same as a 350Z... that's been covered many, many times.

Funnily enough, I called Valvoline's info line, and they had NM35 Stageas on file, knew all about them, and knew all about the different oils and fluids.

There is a thread which makes this clear, it's just the brand that varies. Valvoline and I think Nulon make a Matic J equivalent if you can't get the Nissan stuff. I paid about $120ish for a 20L drum.

Thanks Ryan. Does your car have an LSD and HICAS?

So if its a 250t rs four it definitely wont have an LSD?

Cheers

bigkevracer Grand Master

bigkevracer

Posted
Posted

Mine has neither LSD nor HICAS.

I believe an LSD was an option on the RS, mine just doesn't have it.

Haven't bothered to research them yet to work out if I can get one to fit, not high enough up the priority list.

Also found the rear diff on mine had a magnetic sump plug. Think the front did too, but not the actual engine.

Daleo Grand Master

Daleo

Posted
Posted

As others have said; if you have HICAS, you have LSD. The HICAS rack is very obvious when you stick your head under the back end.

I have a 250t RS Four and it has HICAS & LSD; is good :ph34r:. A quick look should answer your question. If you want to cover your arse; it won't do any harm to use an LSD oil in a normal diff, the LSD oils just don't have friction modifiers in them.

Also regarding the Rocker Cover Gasket; I got one last week and it had to be ordered in; only took a week. Depends when in the cycle you make the order; it could be the day before they ship their 2 weekly lot; could be the day after. I've never waited longer than 2 weeks so far.

slippylotion Mentor

slippylotion

Posted
  • Author
Posted (edited)

Ok. It doesnt have HICAS so Ill asume its not LSD.

So are the oil weights listed above correct?

Seeing as the rear diff is not LSD I will use the same 75w-90 oil weight as the front diff.

Ill also use matic d for the power steering and ATESSA.

Thanks

Edited by slippylotion
Daleo Grand Master

Daleo

Posted
Posted

When I did my research I found that power steering and ATTESSA weren't that fussy. You could use the same fluid as you did in the trans.

Yep :thumbsup: they're just hydraulic pump circuits; any hydraulic fluid would do (any ATF type) there's only pump vanes & seals.

It's only when you introduce friction materials (clutch plates, bands); the type of fluid must match the friction material.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Does the m35 have only proper mechanical LSDs? Some C34s have a viscous lsd which is a sealed unit so that ordinary diff oil can be used in the diff. On the other hand I have an R33 GTR mechanical diff in mine (as does the 260RS and maybe some other) and I use Motul Gear Competition 75W-140 (for lsd) in that.

Daleo Grand Master

Daleo

Posted
Posted

i would imagine its viscous. a mechanical diff in a family wagon? yeah not a good idea lol

I'm not sure; mine's pretty notchy under power, feels nothing like my old cone LSD that was preloaded to the shithouse; much tighter...

Might just be that they don't cop such a hard time at stock power output; so they're nice & fresh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...