Jump to content
SAU Community

Recommended Posts

post-72334-0-32344700-1310660348_thumb.jpgpost-72334-0-93446900-1310660337_thumb.jpghey guys just wondering is it worth fixing this r34 gtt?

its just had the front damage (to me it just seems to be panels)

airbags also deployed(regarding changing the airbags is it just swaping the airbag in the cabin or u have to change the whole srs system with sensors?)

i know panel beaters that are cheap or i should say cheaper, but u wont get a fantastic result.

also how much is it worth to buy? and if anyone has a r34 that'spost-72334-0-09867800-1310660329_thumb.jpg wrecking please step forward.

pics are attached

any help would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/371007-worth-fixing-this-r34/
Share on other sites

if you are insured and they have made it a right off, get a new one! but take all the parts off it that you want to keep even sell off some, if not find out how much it would cost to get back on the road the make your own call

I'd be skeptical of it just being 'panel' damage.

I've seen first hand hits with less damage that have done some major bending of rails and all sorts once you get it apart and have a good look/decent fix. I mean anything can be fixed 'on the cheap', but you'll have to compromise somewhere.

Also as the airbags went off i believe there might be more involved?

Troy or someone else will know more on the topic.

What are the A, and B pillars like? Also the roof.

Any kinks = no deal.

Guards

Bonnet

Entire Rad and Light support (this is spot welded in)

Head Lights (?)

Front bar

Intercooler

Radiator

Airbag sensors

Entire Dash (i think this is the only way to replace the bag on the passenger side?)

Radiator fan (?)

That is what you can see.

You will want to check out the front sub frame to make sure it hasnt moved / engine mounts are still in one piece.

If the panels further back are ok and the engine mounts and subframe is ok, $5k???

It's a 1998 and requires ViV.

it's for sale thinking of buying it and slowly fixing it my self, from my understanding aribags won't cost me more than 300-400 replace second hand and then it's mainly panel damage. I haven't looked at the car yet.

I'm not going to touch it if it has any rail roof or pillar damage.

Should I avoid this u guys think? Toomuch stuffing around?

Haha for a viv you need receipts of all the parts used to repair the vehicle, airbag system reset by the manufacturer along with costly inspections to make sure none of the structural parts have been stressed or welded.

I Pranged my 34 was a lot less damage than this airbags didn't go off is 11k in repairs.

I wouldn't bother with this one mate the amount of work you'd have to put into it wouldn't be worth it. The whole front is caved airbags will cost 2k atleast.

Sell what you can and scrap the rest cars done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...