Jump to content
SAU Community

Recommended Posts

I'm thinking of buy a cheap GTiR for a project car. I'm going for a road going go-kart type deal, so no carpet, coilovers and light engine mods to begin with. Nothing too expensive except maybe a crash cage later on.

I'm not concerned with it being the fastest vehicle around, just want it to be fun, novice-level difficulty to work on and cheap to run/relatively reliable. I'm also considering 180SXs and MR2 GTs, but I'm thinking the GTiR might be better from a cop-bait point of view. Obviously, they can't accuse me of doing a donut, burnout or drift in the 4WD and they generally don't stick out like a modded 180 does. Cheap R32 GTRs are getting down to $10k if I'm gonna splash out, but again with the cops issue, and they might not have the go-kart feel quite like a stripped out GTiR.

What are the usual defect issues with them in Victoria? Do they suffer from the hole in the battery tray issues like a Silvia? Any such achiles heal in terms of defects?

Link to comment
https://www.sau.com.au/forums/topic/371057-pulsar-gtir-opinions/
Share on other sites

nah they are pretty good. I'm not sure what you mean by hole in the battery tray? do you mean roadworth issue when people have cut inner guards for intercooler piping? or do you mean rust problems?

I had a GTI-R years ago (cost $25-$29K back then!). They are great little cars. I would argue less is more with the GTI-R. don't go too over the top and they are a fun rewarding little car. Fair bit more annoying to work on than a silvia though. MR2's are a pain to work on...

but if you are persistent and handy you'll have no problem.

Yeah, I mean defect issues for a hole cut in the battery tray for intercooler piping. It's basically the worst defect you can get for an S15 - have to get an engineer's certificate to clear it in Victoria which is bull****.

What I want to know is does the GTiR have the same issue? Is there any other pain in the ass defect like that specific to GTiRs I should take note of before buying one? Does cutting holes in the car even matter on something that old?

I've tried to find out before if S13s have the same issue as S14/S15s (hole in the battery tray = VASS cert required) and couldn't get an answer. Anyone here know? I'm still considering an S13, but it'll probably be a GTiR.

I know the old gotta pay to play mantra. But if I can get pulled over without having to worry, it'd be good ;)

I'm coming from a 200SX now by the way. It's great, I'm just after something with a bit less road manners, and something that can live outside as I have bought an old Camaro which is taking the garage space now.

I think the pwr cooler that was made up years ago is best for them as no cutting is required around that area.. or even still the top inter heater does it job somewhat ok..

they are a great car i agree with the Baron, need to get the suspension side of things well sorted however.. the full whiteline kit (bushings etc) and a set of coilovers would be good along with swaybars should turn it into a nice handling thing.. probably be able to pick one up with all this already..

i wouldnt go too far with power mods as the boxes are as expected in a early 90's jap 4wd and are quiet weak.. tho 190kw or there abouts make them quiet fun and the box seemed to hold together with this power level..

What's the gearbox? It's not the same as the S13 is it?

My 200SX has an S13 gearbox swapped in and is handling 210rwkw. I'd be hoping to get the GTiR up to that eventually.

I'll either be looking for one with as many mods as possible, or stock with low Ks and prime condition. Depends what comes up over the next little while. Some none too bad examples in the stock/light mods + low Ks option now.

you have to remember that the engine in them is setup like a fwd, so it is sideways compared to that of the S series. so no, the gearbox isn't the same as the S series cars and won't handle quite the same amount of power. the extra strain of the 4wd will also take its toll on the gearbox. for this reason you find that many gtir's are in somewhat poor condition these days, in the same way that a lot of the older wrx's are a bit worse for wear. so long story short, a cheap gtir to build up as a project car could become a very expensive gtir very quickly.

  • 4 weeks later...

i agree with the last comment my mate brought a cheap GTIR 2 years ago and it ended up costing ship load to get right

new clutch, gear box needed new second hand one, rebuild engine again to much trashing and they are not fun to work on lets say cramped engine bay. I had to help fix it and at the end advised my mate if it brakes dont call me .

If u want my advice save a bit more and find a really good one from the start there was one recently on eBay that had no expense spared or find some thing else to build up. thats just my 2 cents any way

good luck with it mate

Great info here. I joined this site in hopes of building a track ready R32 GTR but Richard (Baron of Beer) and others helped me realize my disillusionment. Basically, the R32 GTR is a difficult car to make track ready and probably not worth it.

Due to that fact, I set my eyes on the Pulsar GTI-R but after readying this thread, seems like I would be in the same situation... :closedeyes:

I've been debating the usefulness of turbo applications on the track for the past couple of years and most turbo cars need too much attention and maintanence. As of now, I'm thinking that a N/A car has better longevity and reliability. The S2K or the new Scion FR-S (I'm American) will be a better choice: http://www.sciondimension.com/

I would love to track a Nissan but most U.S. Nissans are heavy and don't have a good daily/weekend warrior ratio. Again, great info on the GTI-R mates. You Aussies are helping me save $$$.

I would say a 200sx would make a good track car easy to get good second hand parts and u can get them cheap to.

The sr20det is a good power plant and heaps of good bolt on's, after i finish my project car i want to build a track / drift car

and i will be looking at the s14 model, import a non registable one with some work done they are going pritty cheap these days.

Edited by chinna

I would say a 200sx would make a good track car easy to get good second hand parts and u can get them cheap to.

The sr20det is a good power plant and heaps of good bolt on's, after i finish my project car i want to build a track / drift car

and i will be looking at the s14 model, import a non registable one with some work done they are going pritty cheap these days.

I'm not sure if that was directed towards me but I'm still very undecided on what to get. I was thinking about the Scion FR-S but Subbie's version, the BRZ, has been anounced. The BRZ > FR-S IMO... but honestly, who knows what set of keys will fall in my lap in the fututre.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...