Jump to content
SAU Community

Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Not exactly minutes, but not too long if you know what your doing, ill do a write up, ill call nissan now and see if i can get the gaskets today, so the standard gaskets are better than the ebay ones yeah.

From what I can see you have major issues I may be able to help with a few things here:

tcs light / slip light stays on - This is common on R34's and is usually solved by putting in new coil packs (jjr, yellow jackets, splifires) this is what I did to solve this in my car.

Leaking gasket of unknown origin - take the heat shield off the turbo and grab a length garden hose put it to your ear and put the other end to the manifolds (turbo and exhaust) check it a section at a time, this is the easiest way to see what is blown (I had a similar problem with mine it was my turbo manifold gasket - replaced with ultra copper gasket maker and it has no problems now).

Boost gauge / controller issues - buy an electronic boost gauge / controller that is known to be quallity manufactured IE: Apexi AVC-R (cheaping out on these cars will really break the bank later on down the line)

If your car is still having issues with these things after this go see a mechanic that has skills with skylines don't take it to joe blogs down the road as they tend to have very specific issues.

also check for perished hoses on the throttle body ( I found 2 on mine and it was in damn near immaculate nic everywhere else)

Edited by RandomHero83

Hey randomhero, well I was told that aswell but the car isnt missfiring or anything? and usually if its the coil packs doesnt the check engine light turn on or anything? well I put the new o2 sensor in and the fuel economy is awsome now, 400kms to the tank thats double of what i was getting :D, as for the idle, I cleaned out the afm with afm cleaner, went for a nice spirited drive and its back on 950rpm so I'm happy, hopefully if its not raining tomorrow I will be changing the turbo gaskets, as for the boost guages I found the problem, the T peice had blown a hole in the middle and was leaking there, i havent ever seen that happen before but yeah wierd haha lol, do you think its time I can put my front mount intercooler on? would I be expecting any power gains from a front mount? also what are the best brake pads that make minimal brake dust? the ones that are on there now are just horrible the whole car turns black after a few stops.

One more thing, is it normal for the rear bar to go black from the exhaust? is that just because its running rich?

Thanks everyone for your help.

Hey guys what do use think is better just geniuine nissan turbo gaskets or permaseal mls-r gaskets? ive read great comments about both, soon ill be running around 12psi like i used to untill these problems arised, please let me know asap please, thanks.

Edited by MrRx7s3

Hey thanks jez I've ordered the permaseal ones and I should receive and fit them tomorrow hopefully, the car still smells really rich from the exhaust, what else could be causing such a rich mixture.

Also I noticed today that when the car is idleing its at around 900-950rpm, when I turn the parker lights on it rises around 150rpm and then when I turn the full head lights on its only raised around 50-100rpm.

Also does anyone know about the black gunk on my rear bar and exhaust that I mentioned earlier.

Thanks to everyone for your help, I really do appreciate it greatly, thanks.

Edited by MrRx7s3

Are you selling the O2 sensors? Im only getting 300K per tank.

I had a similar problem..

My link my post

at the end my AFM was causing the problems, but after cleaning the AAC the idle is much better

Aac cleaning

Hey guys I installed a E-Boost 1 in my car and I'm having some problems, no matter how I set it the boost is never right, it keeps on fluctuating, say on setting 2 I put it to run 10psi it will boost up at 3000rpm spike to 14 and then at 4500rpm just kark it and go to 5psi, its not cutting out or anything just loosing the boost hard, I've played with the sensitivity and gate open pressure and it just wont work right, I'm using iradium plugs 1.1mm gap, currant mods are 3" cat back exhaust, pod filter, I'm getting a FMIC installed this week but i doubt that that will help with the boost, any help is much appreciated, thanks.

Hey guys, well I finally decided to degrease my engine bay, and I thought the coilpack cover should be sealed, well I guess not, and its been missfiring so i just left the car on to let it dry off because my aircompressor is at work and after about 20 minutes of driving/idleing it was ok, now it started again mainly on boost but sometimes on idle, have I killed my coil packs? or should i just wait untill i get my aircompressor back and dry it up? let me know asap please, thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...