Jump to content
SAU Community

Recommended Posts

Had my 34 on the dyno at SST today in Perth (tuning courtesy of maestro Ant), fitted a Power FC and got 287 RWKW = 385 RWHP with

* stock engine

stock Fuel system

stock Turbos

* 1.1 bar Boost

* Power FC

* full Blitz exhaust

* pod air filters

* Trust Intercooler

* No other mods

The power curve is Bullshit, like out of a text book heaps of Torque (Steve can you post dyno graph into this thread?).

Injectors read (on 34TV screen) 98.4% of max !!! So an upgrade of fuel system is around the corner as is New Tyres and twin plate clutch (still standard at the moment).

If you are in Perth and want your car tuned go and see Ant or Steve at SST's, if you can get in to see them it will be well worth your time and money. If anyone can post the chart send me your email address and I will foward it to you to post.

Jeremy

Congrate on the 287rwkw..

Any Dyno graph?

That's very interesting result,consider most people have the similar mods only get about 210~220 rwkw..

******************

stock engine

stock fuel system

stock turbo @ 1.1 bar

Power FC

full Blitz exhaust

pod air filters

Trust Intercooler

No other mods

******************

I did do a search, you seems the only one could get that power out of stock turbo, don't get me wrong, I just try to figure out what did my mechanic went wrong on my mods while I still have my stock turbo

One of forum member has 2835ProS only get about 280rwkw....

thats a good powerfigure for 1.1bar of boost.. but dont forget you have a PFC .. so it sounds about right but still at the top :( ..

atm i have my R34 GT-R with some mods.. you must uprade the fuel system on a GTR after its been modifed.

planning on 330kw at wheels

PFC Pro

HKS Intercooler

Cam Gears - HKS ADjustable

HKS Priest Exhaust : The whole damn way :D

Trust Air Filters

1.3Bar

Nismo Injectors 660HP ?

Nismo Fuel Pump 600-700HP ?

Twin plate clutch HKS .

i had 291KW with the same setup on yours.. with 1.11bar ;)

R33/R34 GT-Rs are so easy to get power out of with standard parts.

Jeremy, That's a very nice car you have there, and I loved the flames that you were shooting out on the dyno. Get the twin-plate in and bring it to Drag Combat, can't wait to see what the stock turbs can do the 1/4 in:D

Jeremy, Your not trying hard enough, lend me the car and you can follow behind to see if the flames come out;)

Yes it was done in shootout mode, and if Jezzrrr get's the graph up then all the details will be on the chart.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...