Jump to content
SAU Community

Recommended Posts

I'll start off by saying this is to vent.

I've always tried to park our families cars as well as I can. I know it's tough to reverse out of your driveway sometimes when idiots don't park close to the side walk, etc.

So it was to my disgust that I woke up today to find that our 4x4 had a smashed side mirror.

Now the funny thing is that when looked closer, it appeared that only the mirror lense was broken... no scratches on the actual side mirror cup... and the whole side mirror was folded in towards the door.

I've previously had issues with mongrels in the street damaging cars.... and I suspect this may be some intentional stuff.

So my question is: Am I thinking too much and it was just some punk with bad driving skills and no conscience? If not... what should I do to stop this? We've got a few cars in the family and some will inevitably have to live outside...

Link to comment
https://www.sau.com.au/forums/topic/371975-rats-in-the-street/
Share on other sites

Security cameras. Had some break-ins on the street around my area a while back, plus we have a laneway right next to our house with randoms always walking past, so I installed 4 security cameras monitoring outside the house (namely down the driveway, looking down the street and most of the gardens). I've got 2 cars parked outside so I figure spending $600 on a camera kit to monitor is a better deterrent than just insurance on the cars. Also put in some flood lights with sensors that turn on when anyone approaches the cameras so it's easy to pick up anything that moves around.

Funnily enough too, I had some small rocks out the front that kept getting thrown around/disappearing, that stopped the day the cameras were installed. It's amazing how different people behave when they know they're being watched, especially when they know they're going to do something they shouldn't.

Failing that, a big dog in the backyard tends to keep others well away from the house. But if you can't park in your driveway and have to park on the street, there's very little you can do. Park on the grass? Park at a neighbours house if you can? Maybe swap around the cars occasionally. Best thing to do is make sure you have full insurance, you can't always be there to watch over things no matter what.

+1 for cameras. People egging my house stopped as soon as I installed them. Don't know how they even saw the cameras because they are kind of small. I picture some cowardly pricks looking around, all paranoid in case someone is watching them as they egg the house, then seeing cameras pointing at them and saying f*** this.

+1 for cameras. People egging my house stopped as soon as I installed them. Don't know how they even saw the cameras because they are kind of small. I picture some cowardly pricks looking around, all paranoid in case someone is watching them as they egg the house, then seeing cameras pointing at them and saying f*** this.

theyre pretty good cameras too.

and not expensive from JB or jaycar.

for $500 you get 3 wireless cams plus a unit.

theyre pretty good cameras too.

and not expensive from JB or jaycar.

for $500 you get 3 wireless cams plus a unit.

Ahh you're better off hardwiring security camera's.... the off the shelf jaycar/electronics store kits are ok quality wise, but a wireless frequency jammer will make short work of them :D Not every casual punk on the street will bring signal jamming equipment though... but I've used them when conducting penetration tests :ph34r:

I took a good look today after work and definitely the malicious as suspected... dead center hit and no damage anywhere else on the side mirror...

Bez: Not around the where you are mate but back at base in Caulfield (shocked as it USED to be a decent suburb)... I guess with school break on kids have nothing better to do.

I pray for their sake I don't catch one of these rats... Looking at installing some sensor lights and fake cameras outside to joint now.

tell me more, about these wireless cams..

go to jb or somewhere lol i dunno much about em. just saw them strolling through. still thinking of purchasing.

Ahh you're better off hardwiring security camera's.... the off the shelf jaycar/electronics store kits are ok quality wise, but a wireless frequency jammer will make short work of them :D Not every casual punk on the street will bring signal jamming equipment though... but I've used them when conducting penetration tests :ph34r:

yeh your probably right. but the kid trolling in my street is abit to retarded to have a jammer. he walks around with powerade in a brown paper bag to make it look like he's gangster.

i wanna back hand him.

go to jb or somewhere lol i dunno much about em. just saw them strolling through. still thinking of purchasing.

yeh your probably right. but the kid trolling in my street is abit to retarded to have a jammer. he walks around with powerade in a brown paper bag to make it look like he's gangster.

i wanna back hand him.

yeah. lets wait for him when he comes round then, i'll hold him, speak some unintelligible azn language and you can back hand him.

yeah. lets wait for him when he comes round then, i'll hold him, speak some unintelligible azn language and you can back hand him.

what are you doing in my street Alvin lol.

nah seriously. he drives this jellybean mazda thing with an exhaust and thinks he's the sickets kent out

go to jb or somewhere lol i dunno much about em. just saw them strolling through. still thinking of purchasing.

yeh your probably right. but the kid trolling in my street is abit to retarded to have a jammer. he walks around with powerade in a brown paper bag to make it look like he's gangster.

i wanna back hand him.

Is this in the Hallam area? If so, I think I know who you're talking about.

And agree about hard-wiring the cameras, it's more secure to do it that way, it may be more work running cables but at least you know they will work no matter what. I did the install myself for all 4 cameras, only took a couple hours work so no biggy.

Is this in the Hallam area? If so, I think I know who you're talking about.

And agree about hard-wiring the cameras, it's more secure to do it that way, it may be more work running cables but at least you know they will work no matter what. I did the install myself for all 4 cameras, only took a couple hours work so no biggy.

yep thats the area. and chances are thats the kid. little blue POS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...