Jump to content
SAU Community

Recommended Posts

I bought this car about a year ago now of the original owner who imported it in to australia. i have all the import papers with. as per normal it was ment to have all this work done to it take it to the hill climb track for it first practice and breaks valve stem guides. So one thing leads to another and we have fully rebuilt have plenty of photos of all the new parts and receipts to prove it. it is a very quick car on dont really want to sell it but i have been offered a job interstate and it isnt going to get used so would like to see someone else enjoy it. it has 12 months rego and i have only run it in an tuned and done 3 hill climbs with it. just seeing if there is some one out there who wants it. has near new kumho ku36s on it aswell. would be probably lookin for around the 23 mark which i think is quite resonable for what it is

Engine:

Rebuilt less than 2000km ago: Makes 319rwkw on 20PSI ? Tuned by RacePace

- CP forged Pistons

- ACL race bearings

- eagle rods

- OS Giken cam gears

- Oil gallery modifications

- N1 Oil Pump

- Oil filter relocation kit

- carbonetics twin plate clutch

- 1.5 way diff

Fuel System:

- Blitz 700 Injectors

- Nismo fuel pump

- Nismo fuel pressure regulator

Induction:

- Z32 airflow meters

- Garret 2860 (-5) Turbos x2

Exhaust:

- 4 inch Custom "RacePace"? exhaust - Turbo back

Cooling:

- PWR Radiator

- 28 row oil cooler

- Air Diversion panel

- Standard GTR Intercooler

Brakes:

- AP Racing 6 pot ? 360mm Rotors

- Hawk race pads

Electronics:

- Blitz Spec R Dual solenoid boost controller

- Apexi Power FC with hand controller

Interior:

- full bolt in cage

- recaro drivers seat

post-77195-0-40888500-1311652115_thumb.png

post-77195-0-77872100-1311652281_thumb.png

post-77195-0-66822900-1311652421_thumb.png

Link to comment
https://www.sau.com.au/forums/topic/372103-r32-gtr-trackstreet/
Share on other sites

rebuild was finished in about may

rebuild was done by old man who is a mechanic of 30 years+ and tuned at race pace

it was bored out new pistons, rods, bearings clutch balanced fly wheel balanced harmonic balancer balanced new valve stem guides and seals new injectors fitted

post-77195-0-64585900-1312081058_thumb.jpg

it did but as per normal bought it of someone that wasnt really shore what had been done and first time at the hill climb track it broke a valve stem guide so did it once and did it properly now it is all good will put some photos up to prove the new pistons and all

yes still using the crank and there is no issues at all with the car. the thing with the crank is when ya smashin them on the rev limiter all the time and that is one thing i dont do can assure you of that, doesnt make you go any quicker. will get some of the in side when i have it out next. there are no back seats because of the cage recaro drivers seat no cd player not one for all the doof doof shit just nice clean and simple.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
×
×
  • Create New...