Jump to content
SAU Community

Recommended Posts

No it's not at all. The only reason everything thinks that is because no one trains legs as much as they should.

Most people are benching around 100kg, then struggle to squat 100kg. That is DISGUSTING!

If people actually trained like they should, 120 atg squats would still be warming up.

Oh I forgot we were all going to the gym for the same reasons as you...carry on...

  • Replies 158
  • Created
  • Last Reply

Top Posters In This Topic

Oh I forgot we were all going to the gym for the same reasons as you...carry on...

Come on brah.

He's right, ppl that can bench 100kg but can't squat 100kg is just sad.

Sure we all don't want big legs, but people who are top heavy with pencil legs look pretty fugly.

Oh I forgot we were all going to the gym for the same reasons as you...carry on...

So you obviously didnt read anything i said. Doesn't matter what you train for, train everything equally.

What do I go to the gym for if your so clever then?

I'm no powerlifter dude.

I lift weights, I do lots of circuits(bodyweight and weight), I do lots of long distance running and sprint work, I swim alot.

I train to be fit and strong at everything. Is that so much different to everyone else???

Come on brah.

He's right, ppl that can bench 100kg but can't squat 100kg is just sad.

Sure we all don't want big legs, but people who are top heavy with pencil legs look pretty fugly.

I never said people who are top heavy don't look silly. You do 20 reps of 120kg dumbell squats and you aren't going to end up with pencil legs. And what if your squats are done in conjunction with a heavy 45 degree leg press? Barbell squats are good, very good, but they aren't the be all and end all of leg exercise.

So you obviously didnt read anything i said. Doesn't matter what you train for, train everything equally.

What do I go to the gym for if your so clever then?

I'm no powerlifter dude.

I lift weights, I do lots of circuits(bodyweight and weight), I do lots of long distance running and sprint work, I swim alot.

I train to be fit and strong at everything. Is that so much different to everyone else???

Train everything equally? So a competitive long distance runner should be hitting the gym with a ton of bench press, building a nice strong upper body instead of minimising weight up top? You really have no idea. Yes, it is so much different to everyone else. If you can't see that everyone has different goals and ways to go about achieving them, then you're something of a narrow minded tool, living up to your reputation in previous threads.

I never said people who are top heavy don't look silly. You do 20 reps of 120kg dumbell squats and you aren't going to end up with pencil legs. And what if your squats are done in conjunction with a heavy 45 degree leg press? Barbell squats are good, very good, but they aren't the be all and end all of leg exercise.

Yeah but that's more than 100kgs lol.

My point was, if your squat isn't higher than your bench, something is wrong, the legs should be MUCH stronger than the functional muscles required to bench.

Well as I said, my gymnasium has 60kg dumbells...I don't know where the 100kg figure came from.

I agree, legs should be stronger than the muscles used during bench press. Not everything is about weight though...consider that you're doing twice as many reps as on bench, with 20 more kg. Legs have been shown to respond better to high reps than the rest of the muscle groups in the body, which is fine...it creates good endurance and in the end it's just another way to build up your legs. More than one way to **** a ****.

Wow you guys are all doing over 100kg's and I'm only doing 50kg LOL, ahh well got to start somewhere :D.

How do you guys get a barbell above your head? I workout at home so I don't have a high rack to put it on

try front squats, easier to get the bar there than on your back

your going to struggle to do the really heavy squatting at home with no rack but there are heaps of exercises to do with lighter weight... search squatting on youtube and you'll find lots of variations... dumbell squats as birds suggested, good when you have no spotter as you can just drop them if it gets a bit heavy...

split squats

overhead squats

one legged squats (good for low weight and core stability)

are you guys using straps to deadlift? I've never tried a 1rm on the deadlift but I do about 140kg for 6-8 no straps... I've also seen people put the bar down between each rep, might try this as usually my hands get tired before anything else

one legged squats (good for low weight and core stability)

Brilliant! Should have mentioned this one before - another way to extend the lower weight of the dumbell squat. It will also be safer to do this exercise with dumbells than a bar.

are you guys using straps to deadlift? I've never tried a 1rm on the deadlift but I do about 140kg for 6-8 no straps... I've also seen people put the bar down between each rep, might try this as usually my hands get tired before anything else

No straps, no belt, just chalk.

I don't let the bar physically rest, it just 'clinks' the ground.

Train everything equally? So a competitive long distance runner should be hitting the gym with a ton of bench press, building a nice strong upper body instead of minimising weight up top? You really have no idea. Yes, it is so much different to everyone else. If you can't see that everyone has different goals and ways to go about achieving them, then you're something of a narrow minded tool, living up to your reputation in previous threads.

Who said no one has different goals. I was basing my comment around general people that go the the gym and train to be big, strong and/or fit, ie 99% of the people on this forum.

I said train everything equally, and this is obviously related to your goal. A competetive runner will train every muscle he needs to run equally, same as any other athlete out there. If your goal is to get a big chest and thats it, then yes, train your chest, and train every muscle used to make your chest big equally. If you want to be all around strong and bit, then work everything equally, which is in reference to my other post.

You know what i mean, your just trying to nitpick for some reason, we are both on the same side here.

I know your a pt and all, but before you even started thinking about doing it it was running my own pt business for a few years, then went into strength and conditioning coaching for various athletes out there, which i did full time. I also studied nutrition and naturopathy, and worked full time in that also. I now work with some of the fittest and strongest guys going around. I also competed in olympic lifting and powerlifting a long time ago now...

So if you think I'm narrow minded think again.

are you guys using straps to deadlift? I've never tried a 1rm on the deadlift but I do about 140kg for 6-8 no straps... I've also seen people put the bar down between each rep, might try this as usually my hands get tired before anything else

I use straps when im doing rack pulls, as im pulling more weight than i can deadlift. But with deadlift i'll just use chalk.

And a deadlift should be down stopping at each rep.

You'll gain more explosiveness off the floor if you lift it from a dead stop each time (hence the name deadlift).

I used to bounce my reps but since i changed a years ago now it did make a big difference when you go for 1rms.

No offense but under 100kg isn't a heavy squat, 10 reps would be easy. At weights like 150, 160 etc its a big difference. Mine was on a 5x5 strength program where if I got a 6th rep out, I'd increase the weight. So those 5 reps are basically 5 reps with nothing left in the tank after each set.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...