Jump to content
SAU Community

Recommended Posts

.82 rear or .64? I've got the .64 making 240rwkw at 20psi dropping off to 16psi (small wastegate). If you have .82 is there much lag? would be keen to see power graphs as thinking of changing rear housings on mine.

Hey Ryan, it's a mate's car, looked like a .6 rear to me. It's coming back for a tickle once we fit a better dump and 19 psi actuator, ill let you know how we go.

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5938433
Share on other sites

E-flex is available at Caltex on O'connel st, North Adelaide. I grabbed a few L into my jerry can for some testing. Using this method I calculated it to be ~72% ethanol, or ~E72.. My crude test lines roughly up with Caltex's claims of being E70 atm.

Tempted to test it in my car, but since my T518z is maxed out, I don't think I'll be netting a power increase of any more than 5%. Well, only one way to find out!

post-3201-0-66490200-1311867328_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5938555
Share on other sites

Its interesting reading peoples opionions on it.

Some real haters to real lovers.

No one is imbetween, u love it or hate it.

Still considering throwing some large injectors and bigger fuel pump in the evo and giving it a crack.

Needing to find places close to me that sells the stuff tho.

Has anyone heard if it will become more and more comman, soon??

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5938971
Share on other sites

one of my mates was saying that 91 fuel is meant to be no longer going to be sold at servo's in aus. the cut of date is meant to be some time this year. tho after a quick google con't find anything on it. it's supposidly meant to be replace by ethonal based fuels.

this is only what I have heard so it could be BS but some of the new commys are coming out ethol ready or something i'm really not sure.

anyone else heard similar?

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5939229
Share on other sites

I use eflex in our car and although the dyno said the car made less the black top said it makes quite a bit more. The car has gone from running consistant 125mph quarter mile passes to consistant 135+mph passes with just the fuel change. We didnt bother putting more boost into it as it wouldnt stay in the dyno so we just left it where it was :D My seat of the pants dyno also tells me that the car is much nicer to drive at any point in the RPM range

I would recomend it to everyone thats for sure.

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5939241
Share on other sites

heard a runour from a mate that 91 octane will no longer be sold at pertol stations as of some time this year? anyone confirm?

supposidly going to be replaced by ethonal based/blended petrol, but again just wht i have heard.

hopefully this means most petrol stations will start to have e85 or at least e70

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5939245
Share on other sites

Real lovers = people who have used the stuff

Real haters = people who have not

That's the way it comes across anyway.

^^ Yer without sounding like a dick or starting arguments, thats what i to have come across.

A concern of mine is that it hasnt been used for say 5 years yet. To get that long term issues etc. As i expect to keep my evo for awhile

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5939303
Share on other sites

well i have used it for abit and im very happy with it.

cant push aside the fact it gives engine protection. and when ppl start pumping boost into engines you wouldnt mind the extra safety..

heck look at simon, he has run ~350rwkw on a STOCK bottom end for AGES and that thing has seen a hard life. i put it down to e85!

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5939345
Share on other sites

Real lovers = people who have used the stuff

Real haters = people who have not

That's the way it comes across anyway.

Your not wrong.

I like driving my E-Flex rb20 just as much as driving my 300kw 98 powerd rb26, the rb20 smokes 3rd the whole way down the start-finish straight at lala :D

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5939892
Share on other sites

a quick search on the caltex site lists these as selling e flex, with more to come by october. interestingly, GM state that over 50 % of their cars sold in Aus will be ethanol based by 2012 end

http://www.caltex.co...s/BioFuels.aspx

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5940183
Share on other sites

heard a runour from a mate that 91 octane will no longer be sold at pertol stations as of some time this year? anyone confirm?

supposidly going to be replaced by ethonal based/blended petrol, but again just wht i have heard.

hopefully this means most petrol stations will start to have e85 or at least e70

correct. Its a Govenrment policy that unleaded 91 will be pahsed out

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5940254
Share on other sites

Even 100RON E10 seems to have much better drivability than 98. It was very noticeable in my R33.

Definitely, but United have had supply issues apparently and have dropped it. They're expecting to have it out again soon though.

What is required as a minimum to try eflex? If there's a servo in North Adelaide I might give it a go, but I was of the understanding I'd have to do injectors/fuel pump/tune?

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/2/#findComment-5942888
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
    • Any idea where I can get genuine MAF apart from used ones? I can't find any only for GTRs and unfortunately that price is not in my budget 🤣 I might gap my plugs down and put my splitfires in, they were only in for a year or so before I started the rebuild 
×
×
  • Create New...