Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering if there is a way to calculate rwhp from 1/4 mile trap speed, and what time this car would be capable of with a better takeoff. My clutch was slipping on anything harder then a 2000rpm launch so i could never take off quickly.

weight: 1430kg

ET: 15.017

Trap: 97.22mph

60": 2.348

Link to comment
https://www.sau.com.au/forums/topic/372424-rwhp-from-14-mile-trap/
Share on other sites

Try this Formula it works out the same as Moroso power calculator<br style="-webkit-box-shadow: none !important; "><br style="-webkit-box-shadow: none !important; ">Need speed and vehicle weight with driver<br style="-webkit-box-shadow: none !important; "><br style="-webkit-box-shadow: none !important; ">.00426 x MPH x = = x weight <br style="-webkit-box-shadow: none !important; "><br style="-webkit-box-shadow: none !important; "><br style="-webkit-box-shadow: none !important; ">.00426 x 118 x == x 3400 = 431.8 , same as Moroso if you set speed and check against weight.

Vehicle weight must be in pounds (2.2 pounds to a Kilo) and it gives rear wheel horsepower

So in your case it would be

.00426 x 97.22 x == x 3146 = 223.49 HP

Try this:

http://www.race-cars...calculator.html

1430kg= approx 3,153lb

I got 226rwhp (166.2rwkw) for you using that page.

I used this page with my Rx7 just to see when I took it to the drags and it wasnt too far off

Edited by Scottydoo

Try this:

http://www.race-cars...calculator.html

1430kg= approx 3,153lb

I got 226rwhp (166.2rwkw) for you using that page.

I used this page with my Rx7 just to see when I took it to the drags and it wasnt too far off

I have always used that and same, it has always been close to what the car has run.

Having said that though, it should be used as a guideline only, as ratio's play a major factor in E.T.

Ye ratios make a big difference indeed.

When the OP said 1430, given its a N/A 300ZX - i simply based off my time of around 1500kg as there is no way a 300zx comes in @ 1430 with a driver :D

I still say 130-140rwkw with that MPH for a 1500-1550kg car

Ye ratios make a big difference indeed.

When the OP said 1430, given its a N/A 300ZX - i simply based off my time of around 1500kg as there is no way a 300zx comes in @ 1430 with a driver :D

I still say 130-140rwkw with that MPH for a 1500-1550kg car

My 300ZX is 1430kg without driver :D Since its the slicktop 2 seater version(no targa tops, no un-necessary electronics etc). It came in at 1506(or so) on the weighbridge with me in it. Diff ratio is 4.08 if it makes a difference?? Since i have a new clutch going in soon, do you guys think a mid 14 would be on the cards?

Edited by Super Drager

that calculator is bogus, it says my car has 700rwhp, it has 500.

r33 with 10.8 @ 135mph.

It has probably been designed with a limited range of data, most likely the more common horsepower cars, eg 2-400hp range, your data is probably an outlier in the equation so of course it won't work for all cars.

All it is is a line of best fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...