Jump to content
SAU Community

Recommended Posts

Hey guys just picked up my next project. It's an r32 gtst with no motor or gearbox. It's was rb20de auto. Just want some ideas/opinions on what motor and box to run. Pretty sure I'm gonna just get a 33 front cut. Any suggestions? And also I'm gettting it painted next week. I'm thinking just go black but give me some more ideas and pics too that would be awesome. Any help would be sweet cheers

Link to comment
https://www.sau.com.au/forums/topic/373091-r32-gtst-help/
Share on other sites

I want a tuff streeter but still be competitive on a track. So I'm heading towards rb25. I went out to a wrecker today and found myself an r33 front cut for $3500. I want to make roughly 300+kw.. Any other suggestions? And what colour

Link to comment
https://www.sau.com.au/forums/topic/373091-r32-gtst-help/#findComment-5952373
Share on other sites

I don't really have much of a budget. Maybe $3000 for motor and box. Is there any difference between s1 and s2 rb25det's?? And how about wiring a 25 into the r32? I heard the gearbox is pretty straight forward but need to mod the speedo cable to suit the r32 mechanical speedo. Just really wanted to know the best and safest way to make 300+ from

a 25. And whether an rb26 would be worth considering... I've built two silvias so I'd love to hear some experience on skylines.

Link to comment
https://www.sau.com.au/forums/topic/373091-r32-gtst-help/#findComment-5952487
Share on other sites

well dont even think about making 300kw with an R33 RB25DET without rebuilding it, AFAIK it wont last long.

a NEO may be able to hold that power for some time unopened.

if you do a search for your other questions, you will find quite concise answers.

good luck.

Link to comment
https://www.sau.com.au/forums/topic/373091-r32-gtst-help/#findComment-5952492
Share on other sites

I don't really have much of a budget. Maybe $3000 for motor and box. Is there any difference between s1 and s2 rb25det's?? And how about wiring a 25 into the r32? I heard the gearbox is pretty straight forward but need to mod the speedo cable to suit the r32 mechanical speedo. Just really wanted to know the best and safest way to make 300+ from

a 25. And whether an rb26 would be worth considering... I've built two silvias so I'd love to hear some experience on skylines.

ok, few answers for you.

1: bugger all difference between s1 and s2 motors other than electrics.

2: yeah need to do a little bit of adapting to get the speedo to work. i think you can use a vl speedo sender, or is it a navara one? but yeah, just search it. plenty of info on it.

3: 300kw is the upper limit of the stock engine with any sort of reliability, although you can make more power but it becomes a time bomb. my suggestion would be a 25/30 for that sort of power.

4: for what it would cost you to buy a 26 and a 25 gearbox, etc, you could do the 25 conversion and mods (or 25/30 built) to be making more power than the 26.

Link to comment
https://www.sau.com.au/forums/topic/373091-r32-gtst-help/#findComment-5953186
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...