Jump to content
SAU Community

Recommended Posts

Hey guys just after some help with spring rates im about to order my coilovers for my race r32 gtst but not 100% sure of on what spring rates i need.

Just wondering what some of you guys are running or recomend.

Any help would be great thanks.

Link to comment
https://www.sau.com.au/forums/topic/373113-some-help-with-spring-rates/
Share on other sites

hi mate, you havent mentioned what you intend to use the car for, or what tracks etc.

since no one else has said anything, I've just gone for 5kg for the rear on a bilstein setup and 8kg for the front or 300pound and 450pound.

as far as i know, the faster guys at my local tracks run about 12kg in the front and 6-7 in the rear, but not 100% sure. 0r 700ponds front and 350-400 rear.

I know gary sydneykid (Gary) who used to be on here used to recomend quite soft rates, like 4 on the rear and 5-6 on the front and let sway bars control roll.

everyone has there own opinion, id say 6kg rear/8kg front on a decent brand coilover would be a safe choice.

good luck, cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...