Jump to content
SAU Community

Recommended Posts

I think from what I can tell, My box is different in the valvebody. As we all know, no really way of confirming these things till one rips it open.

Apparently in mid 2004, the TCU (trans control unit) was moved from external to inside the transmission.

I don't think this actually effects the ability to install a trans-go VB kit, as I have seen sellers claiming compatibility.

This is a link showing removal of a VB, and showing TCU inside the box.

http://www.gtmotorsports.com/pdfs/products/16575_RE5RO5A_VB_RnR.pdf

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

I think from what I can tell, My box is different in the valvebody. As we all know, no really way of confirming these things till one rips it open.

Apparently in mid 2004, the TCU (trans control unit) was moved from external to inside the transmission.

I don't think this actually effects the ability to install a trans-go VB kit, as I have seen sellers claiming compatibility.

This is a link showing removal of a VB, and showing TCU inside the box.

http://www.gtmotorsports.com/pdfs/products/16575_RE5RO5A_VB_RnR.pdf

AFAIK the valve body is NOT the same. but its close enough that a kit can be supplied with the same bits on all RE5R05A models and be compatible across the range.

and yes, the TCU is inside your transmission. 2004+ for M35 and V35 and possibly Z33

Craig and I did my valve body today.

Results on the small tests I did tonight in wet weather are very good.

Shifts in normal driving feel largely unaffected and nice and smooth.

Shifts under harder acceleration are faster and firmer. They varied between fast shifts maintaining the car in the power zone to shifts where the you feel a surge of power on each upshift.

Very happy with the result. :thumbsup:

Craig and I did my valve body today.

Results on the small tests I did tonight in wet weather are very good.

Shifts in normal driving feel largely unaffected and nice and smooth.

Shifts under harder acceleration are faster and firmer. They varied between fast shifts maintaining the car in the power zone to shifts where the you feel a surge of power on each upshift.

Very happy with the result. :thumbsup:

Did you find it as hard to install as the instructions make out?

Did you find it as hard to install as the instructions make out?

It is complicated with lots of ways of making mistakes but it is possible. We had one moment as we were using my shitty torque wrench and managed to snap a bolt.

The instructions are actually pretty straight forward and make a lot of sense when working on it.

Did you find it as hard to install as the instructions make out?

without taking the piss.....If you have a lack of mechanical experience I would not attempt it.

Very easy to stuff up and if you do I have the only spare VB(controlling interest :P ).....and it's not for sale!

I have none, so I'm going to make dad do it.

Can't you get a spare VB from somewhere? Surely if the gearbox was used in the Navara and 350Z they'd be out there somewhere?

Sure you can....just make sure you get the right evolution of it.

Day 2 evaluation:

"D" is now a lot more enjoyable to use for regular driving. I used to always drive in manual mode as the car would always be switching between 4th & 5th. Now the car holds 5th on hills for much longer and when it does kick down the shift is barely noticeable and no flaring.

I will be doing a drive to Albury on the weekend so it will be interesting to see what it is like on the open road.

Thanks Andy, I look forward to reading more reports. My kit should be here soon, but will wait for a bit before installing. If there's any downside at all I'd like to know, but TBO I'm not expecting any given what I've read elsewhere.

What price would I be looking at for 1 delivered to Adelaide?

It will be an extra $10-$15 on top of what I get it to me for....if I was to take a guess about $260 to you.

Ps. This is sort of a group buy....i'm not making money on this

Edited by Jetwreck

Just had Craig install my kit today. :thumbsup: I stayed around to try and 'help' by getting in the way lots. :whistling: I have done most things to my car (brakes, cooler, suspension etc) and I wouldn't want to be doing this myself...

First impressions are awesome. Can't really tell any difference at low speed, still silky smooth changes, but when you put your foot down it kicks you in the back and shifts much quicker!

Brand new 2 door M3 with exhaust had no chance on the way home! :nyaanyaa:

Thanks again Craig. Awesome work.

Yeah, it was defiantly one Mechanic there today, and two numpty's pulling parts off, then putting them back on the car!whistling.gif

I'm in for one of these.

Can wait for my car to start taking shape soon!

Going to order another 3 kits hopefully next week....anyone want to jump on the order to save on shipping and maybe price?

Hey Craig, yeah im up for one of these shoot me a PM with info of deposit details

cheers, Theo.

  • 2 weeks later...

Having installed the shift kit on my car a few weeks ago I have been looking forward to the chance to do a decent trip to see what effect it had on highway driving and economy.

I went down to the snow on the weekend and this is a drive I have done many times and quite a few in recent years in the stagea. The feel in the shift kit on the open road is very good with changes precise and fast ensuring quick overtaking. I always drive the Stagea on highway in Manual mode as I find it a little more precise for gear selection than relying on D.

Economy.

Leg 1. Sydney - Canberra. Result 11.4L/km. (this was after 200km's around sydney and stating on a reading of 14.0L/100km) Previous best is 12.3L/100km.

Leg 2. Canberra - Jindabyne (2 trips to Perisher) - Goulburn. Result 10.3L/100km (this result blew me away considering it included 2 trips to Perisher Valley) (ave speed 104kmh actual)

Leg 3. Goulburn - West Ryde: Result 9.3L/100km :rolleyes: This was sitting on an indicated 122km (actual 116km). (Previous best 10L/100km)

This is on average a 0.7L/100km improvement which is pretty decent. Not to mention the improved performance.

Sounds good. 9.3?! We saw 9.5 from Adelaide to Melbourne over the weekend, and were happy with that. But that was without the shift kit, never thought of it improving economy...

As an aside, do people recommend a larger trans cooler to go with the shift kit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...