Jump to content
SAU Community

Recommended Posts

Hi all. Yet another noob question to ask. How do you tell if the standard shocks on the R33 are stuffed and need replacement? When i said tell, i meant by the way the shocks handle bumps and whether they are noisy. My ride's shocks go squish on all four whenever I go over a hump and I'm not sure if that's how they are or they're stuffed. Also, my R33 seem to have a slight bodyroll on cornering at 40km/h. Are my swaybar bushings shot or am I asking a stupid question as my understanding is that ALL cars will have bodyroll at a certain speed onwards and performance cars WILL have some sort of bodyroll even with swaybars on, except that the difference being between having a sway bar and not having one.

Opened up a new thread on this as I couldn't find a similar thread asking this. Will appreciate all responds.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/373206-standard-r33-shocks/
Share on other sites

Hi all. Yet another noob question to ask. How do you tell if the standard shocks on the R33 are stuffed and need replacement? When i said tell, i meant by the way the shocks handle bumps and whether they are noisy. My ride's shocks go squish on all four whenever I go over a hump and I'm not sure if that's how they are or they're stuffed. Also, my R33 seem to have a slight bodyroll on cornering at 40km/h. Are my swaybar bushings shot or am I asking a stupid question as my understanding is that ALL cars will have bodyroll at a certain speed onwards and performance cars WILL have some sort of bodyroll even with swaybars on, except that the difference being between having a sway bar and not having one.

Opened up a new thread on this as I couldn't find a similar thread asking this. Will appreciate all responds.

Cheers

Check for leaks and also if when you go over bumps the car bounces up and down excessively that is generally a sign that they are wearing out, or simply push down on the car to test. In regards to the body roll the standard shocks on R33's are really shit. Worthwhile saving up and buying a shock/spring combo or adjustable coilovers.

You can get free inspections done at suspension specialist shops if you're unsure.

To check the condition of the shocks, "bounce" the corner of the car. A good shock should stop the bounce in about 1 cycle. And going "squish" is a sure sign that the shocks are not healthy. Also, you will find that the (current) ride quality is actually harsher than if you had new uprated shocks fitted.

ALL cars, even F1, have body roll in corners. It is a result of the weight being transferred to the outside of the corner. It's all about physics. You can reduce the body roll by fitting upgraded sway bars (DO NOT use springs / shocks to control body roll).

In theory you should replace the factory shocks after 50-60,000 kms, personally I haven't replaced mine, and I work in a suspension shop, but these will be the first main change my car will be getting once I get around to doing it, you really can't put a price on shockies.

I know a set of bilsteins I bought were f**ked because when I went over a dump, they were so soft and flat the front of the car would thud on the ground.

They should feel springy, not sloppy. Bilstein shocks are the best replacement and fine some nice springs for them. All depends what you do with the car. If you go adjustable coilover, make sure you get one with a big resevoir or external one so you can control the ride feel. Ive got height adjustable teins, bumpy as shit on the road.

As for the body roll, Ive taken turns at about 60km and you can feel that any more than that the car is just going to roll. Depends what kind of a turn you are talking about, surface of the road etc. Sway bars are the way to go. 16 year old cars here, the bushings are probably dry, cracked, leaky etc.

Edited by SargeRX8

(DO NOT use springs / shocks to control body roll).

I have always been told the opposite, springs and shocks should be primarily used to control body roll while swaybars are there to assist the springs / shocks. Reason being that springs / shocks will control roll in all axes but swaybars will only control left/right

I'm just guessing that in physics, bodyroll is caused by the sudden shift in weight of the body of the car. Maybe Cassbo is right in saying that shocks and springs can control the bodyroll and the swaybars will only assist in the process. But at the same time, I also guess that people tend not to rely too much on only shocks and springs is that in normal street driving, the spring rates are not as high and will NOT support as much bodyroll as higher rated coilovers do on the track, thus the major emphasis is on swaybars to do the job for cars that are mainly driven on the street.

Someone confirm this for me or correct me if I'm wrong?

Have a think about why swaybars are called swaybars...... Springs and shocks are there to work in tandem to control bumps and undulations in the road surface to keep the car level and swaybars control the sway in cars around corners. Simple as that guys.

Look at how a sway bar works and consider its proper name: anti-roll bar. If you go over a judder bar just to be extreme the left and right arms go up in unison and down in unison just swivelling in their mounts and thus have no effect on the car. Its is only when you throw the car into a turn that the arms move in opposite directions and exert a twisting motion on the bar which will tend to return to its original shape thus reducing roll.

To test a shock as above ^^^: push heavily down on a corner of the car and let go. It should bounce back up and stop dead. If it starts to go down again of its own accord its stuffed. Alternatively some suspension shops will repeat this test for free with a meter attached which will measure the the rebound and give you a printout.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...