Jump to content
SAU Community

Recommended Posts

in my r30.. every time i jump on the go fast peddel.. my rear tyers go up in side the rear gards and tag the wheel arches...not the lips rite up in side

and 100 time worse with any 1 in the back

i think it had monro gas rear with king spings...( or maybe ebay knock offs)

my question is what can fit.. what have other people done..

or where can i start looking...

thanks

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/
Share on other sites

Have a look for some KYBs. Any good suspension shop should be able to get them for you.

was going to do a run around today... but was wondering if some shocks and or spings outa some thing else will fit..

the stuff in mine dose not look that old.... but guess crap is crap..

.

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/#findComment-5954832
Share on other sites

You don't want to scrimp on suspension, brakes or steering if you value your life or that of others! Your springs may be ok - just need the shocks. A good suspension shop should be able to tell if your spring rates are appropriate for your car.

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/#findComment-5955682
Share on other sites

You don't want to scrimp on suspension, brakes or steering if you value your life or that of others! Your springs may be ok - just need the shocks. A good suspension shop should be able to tell if your spring rates are appropriate for your car.

think its both... cause its the rear... not rubbing any thing but tyers on inner gards... so as much a i dont like it,,,wont kill the car or me.. you put 2 people in the back.. its just not worth the effort... wish i had a pic of the other day

the biggest question i was trying to find out was what else fits......... or just have to find some good shocks and springs and hope for the best?

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/#findComment-5956060
Share on other sites

im sure there's new springs available, cause there are springs available for mine.

just had a real good look at the springs.. there king and there the rite ones for the car... and shocks are new too...and they junk.. at the moment i am looking into what else will fit...ie(180sx or some thing)

just if the king springs are ment to be harder.. and better.. guess custom is going to be way...

and the sad thing also is the motor in the car is a stock l24.. just with exhaust and pod.. would under stand if i had 300rwkw..but less than 100..

guess some thing not rite.

will post the findings

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/#findComment-5958917
Share on other sites

just had a real good look at the springs.. there king and there the rite ones for the car... and shocks are new too...and they junk.. at the moment i am looking into what else will fit...ie(180sx or some thing)

just if the king springs are ment to be harder.. and better.. guess custom is going to be way...

and the sad thing also is the motor in the car is a stock l24.. just with exhaust and pod.. would under stand if i had 300rwkw..but less than 100..

guess some thing not rite.

will post the findings

pic of my 30 with a bit of load... around 2 average people....

still on the look for what else is going to fit..

post-86667-0-27799200-1313126781_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/#findComment-5963212
Share on other sites

C210 & R30 rear end is same same

S13 rear coilovers fit, but need the top hat changed to a 3 bolt format from the 2 bolt format they come with.

I recommend height adjustable, so you can level out the back of the car in relation to the front.

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/#findComment-5979917
Share on other sites

  • 3 weeks later...

C210 & R30 rear end is same same

S13 rear coilovers fit, but need the top hat changed to a 3 bolt format from the 2 bolt format they come with.

I recommend height adjustable, so you can level out the back of the car in relation to the front.

thanx to all who helped...got some koni's for the street car.. putting the coilovers in the drift car.. .. will keep up dates and pics as soon as i get a chance to do the cage.. and put her together.. again.. chat soon

Link to comment
https://www.sau.com.au/forums/topic/373308-r30-rear-end/#findComment-6006408
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...