Jump to content
SAU Community

Recommended Posts

I am looking for feedback from people about what clutch they run, what power they put through it, the price they paid and how they like it.

Im currently running Exedy 3 puck ceramic, with 290rwkw, i paid 700 when i bought it about 1 year ago and its a pain in the ass to drive on the street but had good bite

Im looking at a Exedy Sports Tuff Organic this time round...

Link to comment
https://www.sau.com.au/forums/topic/37383-the-clutch-thread-feedback-please/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

OS Giken twin plate, unsprung centre - approx 320rwkw.

excellent bite, easy to drive on the street, not too heavy. I can drive this quite easily in traffic too. Easy to launch, as you can load it up then feed it out as you leave the line.

it was necessary to have the car tuned where the initial bite is, so you dont have to pick up the revs and dump to get off the line cleanly - but a few minutes of tweaking and its perfect to take off nice and smooth.

not sure how long before this wears off.
It doesn't, I've had my Exedy Sports Organic clutch in for around 10,000+ km now and it still shudders.

Actually i'll be back at the shop tomorrow that fitted it getting new gearbox/diff oil along with checking out all the clutch hydralics just to see how everything is going. I've got a feeling that it won't last me till the end of '04 because I frequent the local drag strip (drop it from 3,500rpm around 10x per meeting).

Hi raist60, we use OS Giken, twin plate in GTST's and triple plate in GTR's. Once you get used to the rattle when the clucth is dissengaged, they are great. Never slip, not heavy to operate and easy to modulate.

Sydneykid - how much are they worth? what kind of power do they handle?

What would you recommend for my 33GTR with about 270kw @wheels?

I have a heavy duty excedy and it shudders sometimes when taking off slow

tip for those with these clutches: when taking off slow try to give it as little rpm as possible, i find this helps stop the shudder, when you give it a few too many revs, (not launching) it shudders.

Hi ferni, about $3K and a twin plate would be OK for your power levels in a GTR. I don't bother with a triple plate in GTR's until we get over 350 rwkw.

As for how much power? Not a straight forward answer. In a GTST we have over 400 rwkw on a twin plate, no problems. It simply doesn't have enough traction to cause clutch issues, spins the wheel instead, even on R type tyres. A GTR with more than 350rwkw would need a triple plate though if it had T type tyres. I have used a triple plate up to 600 rwkw, where the gearbox became more of an issue than the clucth. A quad plate becomes necessary according to some people over 600 rwkw. I don't have a 1,000 bhp engine (yet) so I have no experience at that power level.

There is of course more than 1 type of OS Giken multiplate clutch. We use the "race" style which has sprung centres, but no anti rattle pressure/intermediate plates. There is solid centre "race" style as well. And sprung centre with anti rattle, which would be good for a road car. They are only slightly different BHP ratings.

Hope that answers your question

There is of course more than 1 type of OS Giken multiplate clutch. We use the "race" style which has sprung centres, but no anti rattle pressure/intermediate plates. There is solid centre "race" style as well. And sprung centre with anti rattle, which would be good for a road car. They are only slightly different BHP ratings.

What would you suggest for a street car (my gtst) that gets its arse caned every other drag meet - slipped from 5-6krpm regularly - and generally smashed and abused at every possible opportunity?

Adrian

P.S. That car's your hero? What is it?

What would you suggest for a street car (my gtst) that gets its arse caned every other drag meet - slipped from 5-6krpm regularly - and generally smashed and abused at every possible opportunity?

Adrian

P.S.  That car's your hero?  What is it?

Hi Adrian, I would go the twin plate with sprung centres and anti rattle.

PS; Apexi V-max R33 GTR, 8.8 at 165 mph, has AFM's, Power FC and runs 9.3 to 1 compression ratio.

shouldnt it be runnin a bit faster at 165mph? like 8.5?

Your right, typo by me, it was 8.47 at 165.75 mph to be precise at 2 bar. On the same day it ran an 8.8 at 155 mph at 1.85 bar. But that's not why I like it, it's because one car, on its own, kills off so many myths. It says you can;

1. Run AFM's and be as powerfull as cars without AFM's.

2. Run a Power FC and be as effective as cars with all sorts of far more expensive ECU's

3. Run 9.3 to 1 compression ratio and make over 1,000 bhp

There are plenty of cars that are evidence of one or two of these, but in this one, single car the 3 biggest myths in Skylines are killed off. Bottom line, it proves this to all those sheep who follow the line, removing the AFM/s, dropping the compression ratio and sticking a map sensor driven ecu in it is the only way to go fast.

Now you know why I like it.

I use the Just Jap 5 puck ceramic with the sprung centre. Drives mostly like standard except reverse parking up a hill when it shudderd a bit and can rattle when disengaged in those cases.

Good take up, not too hard and will bite enough to chirp third pretty hard on standard boost. Being ceramic, on a hard launch, even as you ride it it will take up very suddenly after a little slip and away you go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok cool, because I do have some OEM BMW options for light(er) wheels. 17x8.5 M Sport wheels are 11kg and I could put 255's on them. Maybe that's an initial test.
    • So, in the effort of pulling apart airboxes and testing enclosures to see if this aids in MAP loss at WOT I noticed: 1) The ducts up the OEM intercooler holes from the front bar help IAT drastically, whether the pod is shielded from the engine bay by an airbox missing a lid, or an airbox WITH a lid. Plus you get more induction sound without the lid. Having half the airbox (with no lid) acting as a barrier to the headers seems to help. 2) For shits and giggles I checked the TB. This was full pedal travel. This is actually full travel of the TB. Photos aren't perfect, but there was definitely an amount of play in it and it wasn't against the stop. After much swearing and adjusting the pedal, I realised that the cable is actually too long for the skyline pedal travel to fully articulate it. Having the pedal adjusted so WOT was actually hard open on WOT resulted in an idle of 3500rpm. As an aside, this was also the TPS registering at 3.1%. I removed the above to give the pedal enough travel to actually fully open the TB. I now get a satisfying 'thonk' on full open and full closed which you can hear pumping the pedal as it hits the TB stops (with the bonnet open and intake back on). Luckily for me, the screw screws into a raised metal boss under this plastic piece that is now acting as the new throttle stop. I've gained about 20mm (ish) of pedal travel and I can move it maybe a mm or two post open-thonk before it's hard against the stop. After all of this I did a bit of road tuning because a 102MM throttle is sensitive. The difference between holding an 950rpm idle and instantly stalling is about 0.4% of TPS movement. Will that help? I suppose it can't hurt. I set 'closed' point back to where it was, I can definitely feel the extra pedal travel that is needed to actually open the TB fully. But this morning I dropped the car off at Paint Jail again, so who knows when this will re-eventuate out to see if it helps with the top of the dyno hitting a ceiling.
    • Take heart that everyone else seems to have found a way. The OEM S1 indicators do slot in pretty firmly. It may simply be a case of having them sit slightly looser and nobody actually ever noticed this when attempting to remove a indicator from a JSAI bar :p
    • If the original NA ECU has a separate TCU then you are going to need to reroute wires that used to run between the trans and the TCU to the appropriate (1 to 1 equivalent) pins on the ECU. Other than that, it should work. Look up posts by @Kinkstaah on the subject.
    • So the stagea was a series 2 neo det with tiptronic auto. (I have the transmission aswell) and has integrated tcu in the ecu. I'm hoping to use the entire stagea ecu, engine and auto harness. 
×
×
  • Create New...