Jump to content
SAU Community

Recommended Posts

And no I will not put this thread in cosmetic/styling section as too many people there are too afraid to spill a bit of sauce off their felafel/yiros/kebab on their hektik chromies. Nor would most of them know a bees dick about aero other then a killa spoiler bro!

So, now that that is out of the way, aerodynamics aid a car in handling, acceleration, braking and aid grip also hence why its in this section and where I hope to find my answers.

Basically, building a 33 gts-t for a variety of motorsport uses (yes I do realize its not the best base) with major ones being time attack, hill climbs and possibly a bit of sideways action (nothing wrong with getting a bit shaky?).

So whats the best way to improve on aerodynamics?

Ive had a few ideas in my head and have started playing around with scale models.

Plan of action for now is:

a) Front splitter

b) Sealed under body

c) Rear diffuser

d) Wing

My main concerns here are:

What designs work well

What materials work well (besides the obvious $$$ carbon, kevlar etc)

How much is this really going to aid me overall? im talking the big picture here... sure race cars use it but how efficient can all these things really be in a lets say tight technical hill climb with short straights?

And lastly,

Has anyone had a tinker with these things before that can guide me in the right direction?

:cheers:

Edited by SkyHi_33
Link to comment
https://www.sau.com.au/forums/topic/373915-lets-talk-aerodynamics/
Share on other sites

This is something I to would like to know about, I'm going to be doing similar mods to mine hopefully with a aero gain.

I think with a rear spoiler most people forget about actually making a support for it so it actually helps with downforce as apposed to just pushing or bending the boot.

At the end of the day it depends on how much money you want to spend and how competitive you want your car to be, things like rear diffusers are pretty expensive and unless you can actually test it in a wind tunnel who knows if it will actually do anything.

The main things I think would be a proper rear wing, so not your auto salon spec ones but a properly designed one which is light weight carbon or similar, I know russman got his made for him so something like that.

Found this link

http://www.skylineowners.com/forum/showthread.php?t=164563

Edited by eightsixboy

Well from what I have gathered:

a) Front splitter

Flat, open design towards the back to still ventilate some of the pressure built up in the engine bay from air going in through bumper/grille. Sealing the whole front of the car without having air venting out of the engine bay creates a high pressure zone which stops the air circulating through radiator/intercooler etc therefore resulting in high temp buildup. Also incorporating a "lip" so to speak in front of the wheels diverting air away from tyres and towards the centre of the car helps with more airflow thus creating a better low pressure zone under the car

b) Sealed under body

as flat as possible seems to be the go, although I have seen raised sections through the middle which apparently help dissipate the air more effectively through the rear diffuser which creates a higher disruption at the diffuser end = less drag, more downforce

c) Rear diffuser

a LOT of different designs ranging from smooth to rough, fins, planes etc etc.. all seem to focus on smoothing the transition between fast moving air from low pressure zone underneath to slow moving air above the car, again creating less drag and more downforce. Seems the smoother the underbody the more ridiculous the diffusers get.

d) Wings

again, a lot of different designs but main points Ive picked up from this is you can never have a big enough wing (within reason, and regularities) but it has to be mounted right with supports extending through to the chassis. The good old vtec bolt on job just doesn't cut it.

That, in a nutshell, is some of what Ive taken in as a focus on this little project of mine. Suggestions, improvements, theories etc. are most welcome :)

The point of a wing is to create downforce and hence grip on fast corners. The down side is that it will slow you down on a fast straight. What I don't know is at what speeds it actually works on a skyline as opposed to an open wheeler - I suspect some where above 140- 150km/hr at least. Therefore if you decide to have a massive rear wing I should think it would need to be adjustable to suit different circuits or ideally adjustable for different parts of the circuit but depending on what kind of racing you are planning there are probably category regulations about the kinds of spoilers you can run. The University of Auckland has a wind tunnel you could fit a full sized car into - it would be worth investigating who in Australia could provide such a facility.

This site has a lot of info about aerodynamics. Just do a search. Here is one example;

http://autospeed.com.au/cms/A_2456/article.html?popularArticle

Now..someone explain why Nissan made this a factory option :P (drops down at 80km/h+)

Autospeed website is the one ive been reading through for most of the information however a lot of their articles focus on fuel consumption and road cars rather then the conventional racing principles. While it is very useful and gives a lot of ideas and concepts its not really very applicable to my needs :( but its definitely worth a read.

heres a pic of my bar with incorparated splitter. its 400r glass bar i had on my car for years, got pretty beat up so rather than bin it I thought i would have a crack at turning it into something better.

I put it on the car and marked out what i had to cut off the bottom to allow the splitter to be lowest and the very front, slightly angling back up at the rear. cut off what needed to be cut, then i bolted it up to the centre, and made some L shaped brackets to bolt it from the corners, and was nice and strong then I glassed down to the alloy and added the 4 steel turn buckle braces. the splitter itself is 2mm alloy sheet, next time i'll use 1.6mm.

I got the idea & diamensions from local guys with uber fast skylines (brad sheriff & pete nunn) so i cant take credit for the design

I've also added a wing, with a 1440mm carbon blade, 300 mm uprights. the wing has a built in gurney flap design. i'm in the process of designing dual bladed end plates for it out of carbon & alloy. at the moment i dont know if i like it, i may end up getting a big 1700mm origin wing from japan.

next project will be making 1.2 or so mm alloy belly plates from my skirts into the rails. but I've got other more important things to do at the moment, when i have spring rates and other major things dialed in, i will look at belly plates to smooth out air flow under the old bus.

regarding diffuser for the ass, i did a bit of asking around and reading up, seemed that unless that the floor was dead flat after the rear wheels, it was fairly pointless. and at this stage, i'm just starting to look at events like hill climbs, time attack events etc, so just the basics will be more than enough for me and my datsun

cheers

post-47373-0-06102200-1313310052_thumb.jpg

post-47373-0-27399900-1313310632_thumb.jpg

post-47373-0-26557100-1313310644_thumb.jpg

post-47373-0-60885700-1313310684_thumb.jpg

post-47373-0-87672300-1313310699_thumb.jpg

The point of a wing is to create downforce and hence grip on fast corners. The down side is that it will slow you down on a fast straight. What I don't know is at what speeds it actually works on a skyline as opposed to an open wheeler - I suspect some where above 140- 150km/hr at least. Therefore if you decide to have a massive rear wing I should think it would need to be adjustable to suit different circuits or ideally adjustable for different parts of the circuit but depending on what kind of racing you are planning there are probably category regulations about the kinds of spoilers you can run. The University of Auckland has a wind tunnel you could fit a full sized car into - it would be worth investigating who in Australia could provide such a facility.

Formula 1 Style DRS would be cool :) lol best of both worlds

Oh wow, great stuff there! I like your splitter design. Is there any specific reason for the dimensions/shape at the front? Have you tested the splitter and did it generate any difference at the driver end?

design and shape, as i mentioned I've tried to replicate what is on 2 very quick local gtst's. 2ndly, i like the snow plow industrial shape lol.

i havent tested yet no, i'm in the process of... other shit. fixing/flaring front guards so i can get it all painted up at the same time. along with different coilovers/sway bars etc. i dont like changing more than or or 2 things at once so i can feel what does what, but tuff shit it all needs doing at once haha

cheers

Haha yeah i know exactly what you mean... im undergoing the same process, changing suspension setup, playing with guard clearances and its all in primer and part bare metal so basically same deal, want it all together before a spray!

Edited by SkyHi_33

If you had a completly flat undertray wouldn't you need a vented bonnet to equalise pressure in the engine bay?

I guess diffuser at the back would act like a vortex generator from low to high pressure. Seems like these are essentials that others have said are not a good idea??

If you had a completly flat undertray wouldn't you need a vented bonnet to equalise pressure in the engine bay?

I guess diffuser at the back would act like a vortex generator from low to high pressure. Seems like these are essentials that others have said are not a good idea??

Yes, a completely flat under tray = high pressure buildup in engine bay = no air flow through radiator/coolers etc. unless you got a form of extracting the air. So a front splitter with a reasonably open space towards the back of the engine bay is a far better idea then a completely sealed under tray. Even if it was completely sealed a simple vented bonnet wouldn't do much, it needs a directional airflow to function properly and on top of that, if it was a directional airflow it also has to be vented at a certain angle to keep the airflow from the bonnet on to the windshield undisturbed (otherwise creating drag)

What I had planned was an extended splitter with vents towards the back and a reasonable ammount of gap to the end of the engine bay, from there on it would be mostly sealed however im still not sure if sealing the driveshaft/exhaust tunnel is a good idea or not due to temp build up from the exhaust. Its something im still working on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...