Jump to content
SAU Community

Recommended Posts

my old man is moving to australia at the end of the year and is planning to bring his +4 morgan and triumph tr3 over with him,

whats the go with how to get them over here to brisbane and who are the best companies to do so? they are both LHD one is in running condition the other needs an overhaul.

any help would be great.

cheers

riley

Link to comment
https://www.sau.com.au/forums/topic/373957-importing-from-canada/
Share on other sites

Both will be fine to import, and can also be registered LHD anywhere in Australia. If you're old man wants help with it, tell him to drop me a line.

he's right about the triumph, but the morgan yes its an old car but its the only hand made( completely) car in the world even though the year model is in the 60's it was manufactured in 1994.

the morgans chassis is also made of wood lol is that going to be a problem to import?

and do u have a rough price it would cost to ship them both at the same time? like a bundle deal

+1 it is flat as at the moment ( Oz market is not that much better.)

just found out that its only a problem to import raw wood, so the morgan should be fine ( minus the obvious clean it needs before shipping)

iron chef any idea what the price would be, and is it cheaper to import two than just one?

if you import 2 cars at the same time there is potential to save a couple hundred dollars here n there.. but ultimately no it isn't cheaper because most of it is government charges and labour...

as for the wood thing - please get clued up on modified pre 89 imports.

it basically is there to stop people like hot rodders from bringing in:

Model T Ford w/ chopped roof and 15in wide rear wheels with a custom tub rear, with an LS7 engine conversion... that has been built onto the chassis of a chrysler PT cruiser in 2007.

^^^ it was to close the loophole that gave potential importers the ability to import "pre 89" cars with them being pre 89 purely on face value.

however in the wake... it's affected an entire market of people unable to import their cars. I should also note that import approval is still given the "yes" or "no" approval by the same people and REALISTICALLY not much has changed.

however you mentioned something something something built the car out of wood because you thought it was cool to be Armish in 1994 - :P

in that example its best to speak to australias dept of transport about it.. just in case. would hate to see youre claptraption be declined import approval due to no homework being done..

..that's all i was saying :)

just found out that its only a problem to import raw wood, so the morgan should be fine ( minus the obvious clean it needs before shipping)

iron chef any idea what the price would be, and is it cheaper to import two than just one?

Shoot me an email mate (see my sig) and we'll get you some prices. The wood won't be a problem. To answer your last question, probably not ;)

if you import 2 cars at the same time there is potential to save a couple hundred dollars here n there.. but ultimately no it isn't cheaper because most of it is government charges and labour...

as for the wood thing - please get clued up on modified pre 89 imports.

it basically is there to stop people like hot rodders from bringing in:

Model T Ford w/ chopped roof and 15in wide rear wheels with a custom tub rear, with an LS7 engine conversion... that has been built onto the chassis of a chrysler PT cruiser in 2007.

^^^ it was to close the loophole that gave potential importers the ability to import "pre 89" cars with them being pre 89 purely on face value.

however in the wake... it's affected an entire market of people unable to import their cars. I should also note that import approval is still given the "yes" or "no" approval by the same people and REALISTICALLY not much has changed.

however you mentioned something something something built the car out of wood because you thought it was cool to be Armish in 1994 - :P

in that example its best to speak to australias dept of transport about it.. just in case. would hate to see youre claptraption be declined import approval due to no homework being done..

..that's all i was saying :)

ok lets clear sumthin up.......the amish were cool in 1994 and still are.....i wish i was amish.....churnin butter and stuff...................and the chassis is wood cause its lighter and easier to replace than steel. dont worry i hang shit to my old man about owning a car made of wood. thanks for the info. and iron chef ill get the details and try to get my old man to sort a date and stuff out with u

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...