Jump to content
SAU Community

Recommended Posts

FYI demerit points take 3 years to expire from date of offence and if you are on an option notice or suspension for getting too many points, you will lose 12 of them at the end of the suspension period.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5967517
Share on other sites

...from my previous experience they expire after 12 months of the offence but thats on a probationary, are you talking about full license?

I went to court and lost 5 points, this day last year, and took the option of no points for 12 months rather than lose it for 3 months. At the end of that option I get my points back but during that time I went from probationary license to full, so when I do get my points back it will be the full 12 rather than the 5. Just needed to know what date I got them back.

Gave them a call put on hold for about 15 minutes and hang up. Will just go down to Vicroads itself and push in to quickly ask :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5967675
Share on other sites

No it's P-Platers that acquire more than 5 points in a 12 month period, lose the plastic.

That's the additional rule, not a different one.

The 3 year rule still applies to everyone for points expiration far as I'm aware. Regardless of transition.

If you got 3 points 12 months ago, it's 2 years before they reset.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5967708
Share on other sites

^3 years on a full license as full licensed drivers get 12 points per 3 years, where as a P-plater gets 5 per 12 months, as I was a p-plater when I lost them as far as I know it's a year 'til they reset.

On the option letter they sent me, I had a choice of loss of license for 3 months then after that have full points; or "good behaviour" for 12 months - not losing one point, then regain all my points back also.

Might have to dig the letter up to double check.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5967800
Share on other sites

No it's P-Platers that acquire more than 5 points in a 12 month period, lose the plastic.

That's the additional rule, not a different one.

The 3 year rule still applies to everyone for points expiration far as I'm aware. Regardless of transition.

If you got 3 points 12 months ago, it's 2 years before they reset.

Im pretty sure Ash that when your on your P's it resets one year from when you lost it..very confident in that

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5967804
Share on other sites

Yeah it must be, otherwise the whole being on 0 points for 12 months concept wouldn't work because essentially it would be 3 years. The whole point of it was not losing the license for 3 months, rather being on 0 points for 12 months then regaining the points, however, if you do lose a point that original 3 month suspension gets doubled to 6.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5967817
Share on other sites

Im pretty sure Ash that when your on your P's it resets one year from when you lost it..very confident in that

Hrmm... If it worked like that though, a P-Plater could effectively get 15 points in 3 years, which doesn't then sound right as is more than someone on Full.

Pretty sure it was a MAX of 5 in any 12 month span, with 12 overall.

Either way a call to VicRoads would confirm/deny it if you need to know.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5967912
Share on other sites

Hrmm... If it worked like that though, a P-Plater could effectively get 15 points in 3 years, which doesn't then sound right as is more than someone on Full.

Pretty sure it was a MAX of 5 in any 12 month span, with 12 overall.

Either way a call to VicRoads would confirm/deny it if you need to know.

That's what it was when I was a P Plater. 5 points per year to a maximum of 12 in 3 years. 12 points over a three year period for a full license holder, the 5 point restriction in a year isn't there.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5968107
Share on other sites

Gah, you don't lose points, you get demerit points. Here's how it all works:

- Earn 12 points in the space of 3 years (as a P plater or full licence driver) and you will get an option notice.

- Earn 5 points in the space of 1 year as a P plater and you get an option notice.

- ALL points regularly take 3 years to expire, UNLESS you get an option notice...in which case, you will receive a clean record (0 points) at the end of the chosen option (1 year good behaviour, or 3 month suspension).

- Points that are earned as a P plater do not "expire" after 1 year, they stay on your licence record and still count towards the 3 year rule, they just no longer count towards the 1 year rule.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5968768
Share on other sites

So just to clarify Martin, you got off a 12 month probation and you still had a demerit point? If so, that would have been because the last fine you got, pushed you over 12 points. Anything over 12 points and it carries on to the next period of points...

e.g. say you're on 11 points and you get a 3 point fine...survive the probation period of 12 months and your blank slate will start off with 2 points.

It just retains some "value" to the punishment, in case people sitting on close to 12 points commit a major offence...otherwise they would be left in the same boat as someone on the same points committing a minor offence, i.e. both start with a completely blank slate.

Link to comment
https://www.sau.com.au/forums/topic/374111-demerit-points/#findComment-5969306
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...