Jump to content
SAU Community

Recommended Posts

Just got my GTR very happy with it, however now i have 2 problem,

1. Does anyone know what the HICAS light for? This is because i was driving my GTR on the freeway and suddenly the HICAS light just came out but i dont fell much different. The light just stay there all the way until i restart my car again. It came out a few time but i can find much information about it.

2. Does anyone have any user manual or installation manaul for GRID tourge control. I have one of those unit but i still cant figure out how it actual work. This is because when i turn on the GRID and let say i put 20% force to my front.

Inteory the 4WD light on the dash suppose to come up but for me it does not. I need to turn off and on the control unit a few time then only the light comes out. Does anyone have this same problem,i guess the previous owner have install it worngly but i am still not sure.

Second onece i play with the GRID unit. I can fell that my brake is automatic engage by itself if i turn my stering or wheel to end of one way,let say i turn all the way to right. The brake will engage by itself and the wheel seen to be lock about 10% of presure as i can fell it.

Can anyone out there help me pls......i been looking around for information but i cant find much.

Thanks

Calvin

Link to comment
https://www.sau.com.au/forums/topic/37435-gtr-problem-pls-help-mepls/
Share on other sites

Hey calvintys...i had a hicas problem once...same car as you, but when the hicas lighted up the car would then swerve left or right...not sure what was going on there but brought it to my mechanic n they fixed it...cost quite a bit though...said was some control arm thing.

have a look on the net...there are plenty of places which teach you to put the car into diagnostics which will then flash hicas error codes if you have any errors with the system.

hmm...not sure on that GRID thing. i understand that the 4wd light will only come on if there is a problem with it, but i think if your torque split controller is installed properly then the system shouldn't think there's an error, hence no light??

also, the attessa system is linked with the abs system which could indicate your torque controller is not set up properly, thus causing the brakes to bite??

Hicas, dunno, get a mechanic who knows what there doing and has the fault codes to check it for you.

Grid controller is working fine, if the light comes ON then there is a problem, not when it's off.

If you have it activated and turn a corner slowly, it is binding up the clutch packs in the centre diff ( ATTESSA) cos the pressure is still being applied to them by the controller.

What is then happening is it is trying to turn the front and rear diffs at the same rate when in actual fact there is supposed to be a difference.

If you know someone with a proper 4wd( ie. patrol, landcruiser ) get them to put it in 4wd and then turn slowly around a corner. You will hear the wheels skipping as the tyres should be rolling at a different rate due to the different arcs they are travelling but the locking of the diff won't allow it.

That is what you are doing to your GTR by doing that with the controller. There should be an auto setting which disengages it automatically ( which is why it's called auto) once you get below 15-20KMH.

Cheers

Ken

rb26dett And Gtrken >>> Thanks alot for the information, now i am far better before, fell that my knowledge have increase. Once again thanks for the help as i appreciate both information alot. :(

As for the split controller i am using GRID T.S DANSER.. if anyone have any information on it will be appreciate.

uuuhhmm, if the steering wheel has been removed, replaced or even tampered with and is slightly off centre, doesn't that also cause the hicas to light up??

Yeah, that's what I was going to suggest...

I replaced the steering wheel on one of my old skylines and the hicas light would come on randomly above 80km/h and stay on until I turned the car off.

I also used the wrong boss kit and the sensor didn't line up correctly, so that might have been the problem too...

Just to also agree with Mesh and Merl - if your car has an aftermarket wheel and a non-HICAS boss kit fitted (or as Mesh said, had this combo sometime prior) - then after about 15 minutes of straight driving - ie: no steering input - the HICAS system thinks something is wrong and turns on the warning light. It thinks the car has gone to sleep.

Scared the bejeezus out of me the first time (was between Tarcutta and Gundagai - ain't no performance workshops out there) but is nothing to worry about :(

J

Thanks guy for the information but the sad case is i dont have an after market wheel, as i am using stock standard nissan wheel with air bag. Hope that next week when i take my car to check the problem is not serious. Thanks everyone whom here to help.... this will keep my skyline spirit increase.... Skyline forever or RB26DET

  • 2 weeks later...
Guest INASNT
What if the HICAS light is always on?

As in my case.

http://www.skylinesaustralia.com/forums/sh...3241#post783241

If it always stays on and there isent a problem, then the cheapest way to fix it is to just take the bulb out from behind it and u wont see it light up anymore.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...