Jump to content
SAU Community

Recommended Posts

I was curious as to what the most power made on a stock RB26 crank is? I actually have a 25 but I haven't found a very high hp one and figured the 26 crank is as close as I could get. I'm building a drag RB25 and am keeping the stock crank as I don't know of an aftermarket 25 crank. I know rob@rips has made alot of power on a 30 crank but wasn't sure how well that would translate to a 25.

Link to comment
https://www.sau.com.au/forums/topic/374796-most-power-ever-on-a-stock-rb-crank/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Damn looks like I'm aiming for well beyond the max then as I'd need around 800Rwkw to be competitive in the class I will be running. Has that been because they break beyond that or because people who are looking to make more power get aftermarket cranks?Here is my build:

http://www.gtr.co.uk/forum/155003-drag-rb25-s13.html

Edited by jimefam

Damn looks like I'm aiming for well beyond the max then as I'd need around 800Rwkw to be competitive in the class I will be running. Has that been because they break beyond that or because people who are looking to make more power get aftermarket cranks?Here is my build:

http://www.gtr.co.uk/forum/155003-drag-rb25-s13.html

where did i say 600 was the limit? :blink:

Your build thread is quite interesting, what block modifications etc are you making?

There is no mention of it.

where did i say 600 was the limit? :blink:

You didn't. And I didn't say that you had said it was the limit. I asked what the max power made was and you responded that well beyond 600rwkw which I assumed meant under 700 or else you would have likely said beyond 700rwkw. I proceeded to ask if that was the max made so far because they broke or for some other reason. No limit has been implied by either one of us although that is what I was trying to determine.

cant see why 25 and 26 cranks wouldnt be just as strong if not stronger than 30 cranks. they can handle more power than you'll ever need

Thanks for response. It's good to have a source where to ask questions since info on these motors is very limited in the US. I've received some great info from experts and in particular Paul from Red R Racing has gone well beyond the norm in providing me with valuable insight and R&D based on his experiences. That's one thing that always impresses me is how selfless people can be when I'm not doing any business with them and they still give me a hand on things they make a living off of.

You didn't. And I didn't say that you had said it was the limit. I asked what the max power made was and you responded that well beyond 600rwkw which I assumed meant under 700 or else you would have likely said beyond 700rwkw. I proceeded to ask if that was the max made so far because they broke or for some other reason. No limit has been implied by either one of us although that is what I was trying to determine.

Well i can only tell you that which I've seen first hand.

Others might have seen cars go over 700.

Im not going to tell you 1000 if I've not seen that consistently... That would defeat the purpose.

Plus you never said how much you wanted in the first place. Had to start somewhere.

Well i can only tell you that which I've seen first hand.

Others might have seen cars go over 700.

Im not going to tell you 1000 if I've not seen that consistently... That would defeat the purpose.

Plus you never said how much you wanted in the first place. Had to start somewhere.

Really I will have to see what it takes to be competitive in X275 at my minimum weight. A top run in that class is 4.80's in the 1/8 and I will have to weigh 1295kgs so we'll see how much power it will take for me to accomplish those times. I have to admit I'm surprised to see such high numbers on a stock crank as I saw so many aftermarket ones and even Nissan created the N1 crank I assumed that some weakness must have existed. I did get an email back from Paul at Red R Racing and he also confirmed that he had made 1350hp on a prepped stock and had spun them to just over 11k so apparently I should be fine.

That's one thing that always impresses me is how selfless people can be when I'm not doing any business with them and they still give me a hand on things they make a living off of.

You could argue he isn't being selfless because by him doing what he does he gets massive respect on these forums and people will always keep coming back. I don't think he does huge volume though so I'd say he genuinely just does it for the love.

You could argue he isn't being selfless because by him doing what he does he gets massive respect on these forums and people will always keep coming back. I don't think he does huge volume though so I'd say he genuinely just does it for the love.

Lol I suppose one could look at it that way but to be honest with you Paul knows that at least for the foreseeable future he can't expect any business from me(I'd already ordered everything and found a local shop to do the machine work.) and yet he's still been not just willing to answer questions but to offer up advice without request from me. Not everyone has been so forthcoming and others who would have similar motivations as what you suggest haven't been as helpful. Regardless I appreciate the help of anyone who will give something for nothing.

I did get an email back from Paul at Red R Racing and he also confirmed that he had made 1350hp on a prepped stock and had spun them to just over 11k so apparently I should be fine.

has he really? he's built an RB26 running 1350hp on the stock crank revving to 11,000rpm. i'd love to hear what car it's in. i've never seen or heard of it. not that i've seen or heard of every car ever made but the ones making 1350hp that are built in my own state by someone I know tend to stick out...

BTW there is no such thing as an N1 crank.... N1 engines use the same crank as all RB26s do. there are only really 2 types of crank. early model R32 (short oil pump drive) and then every thing else (late R32, all R33, all R34, N1, Nur etc) which has the larger oil pump drive. but apart from that small difference even the two types are the same.

has he really? he's built an RB26 running 1350hp on the stock crank revving to 11,000rpm. i'd love to hear what car it's in. i've never seen or heard of it. not that i've seen or heard of every car ever made but the ones making 1350hp that are built in my own state by someone I know tend to stick out...

BTW there is no such thing as an N1 crank.... N1 engines use the same crank as all RB26s do. there are only really 2 types of crank. early model R32 (short oil pump drive) and then every thing else (late R32, all R33, all R34, N1, Nur etc) which has the larger oil pump drive. but apart from that small difference even the two types are the same.

Really? Just the one crank? Well I must be mistaken then but I was basing my info off of nissans own info. On this page they show two cranks:

http://www.nissanparts.cc/catalog/?section=958#3232

Oh and it was one car that made 1350hp and another that revved to 11,000 not both. Although I didn't ask what the one that made 1350hp revved to. Do all the engines he makes stay in your state? Otherwise I can't see where being geographically close to him would help you know all the engines he's made.

It will handle 1 billionty millionty zillointy killer wasps...

what's with the stoopid 'how much hp can my m8 bolt handle' threads???

Hey genius you don't like the thread topic, don't click on the thread. It's not an idle question either, cranks in general aren't indestructible and I'll soon be in a position to take one to a power level most cranks would fail at.

Edited by jimefam

Really? Just the one crank? Well I must be mistaken then but I was basing my info off of nissans own info. On this page they show two cranks:

http://www.nissanparts.cc/catalog/?section=958#3232

You mean these two, correct?

gt%20crank.jpg

N1%20CRANK%20small.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...