Jump to content
SAU Community

Recommended Posts

Hi guys

I have for sale my R32 GTR which I had planned to do a full ground up build on. But pulling the pin on it due to other stuff going on in my life.

I am the only owner since its been in Australia, I imported it a few years back it is complianced and was registered but rego since has ran out. While in Australia I probably only drove it on the actual road for less than 10,000 km. The car was Grade 4 vehicle, with no accident history. When it arrived we only found a a small rust spot on the lower right hand rear panel which we fixed up. All running gear is still in the car, the motor has been pulled out and the interior expect for dash and console assembly has been removed. There is no backseats, roll cage was planned to go in. The underneath and body is all straight.

The body has been sanded back, but still requires further sanding and prep'ing for spray painting.

I want to sell everything as a complete package.

What's included -

Complete R32 GTR rolling shell

RB26DETT motor its done around 130,000 km

- Trust fuel rail

- Sard 700cc Injectors

- Nismo N1 steel wheel turbos

- Exhaust manifolds are slightly ported

- Mines dump pipes

- Cam cover gaskets and all turbo gaskets have been replaced

- NISMO twin plate clutch/NISMO fly wheel

ECU - NISTUNE chipped, safely tuned to 232 rwkw.

ARC front mount intercooler painted black

APEXI twin pod filters

Twin exhaust system

7 point roll cage

TEIN coilover shocks with EDFC damper controller

CUSCO front strut brace

CUSCO adjustable castor arms

Nardi Steering wheel

NISMO 320 kmph instrument cluster (31727 km)

NISMO center console gauges

APEXI boost gauge

RECARO fixed bucket seat (Passenger seat standard)

Top Secret aero kit

Aftermarket fibreglass bonnet

Standard R33 skyline wheels

Asking price $11,500

Great start for someone looking to build a track car or a really unique street car.

Contact 0403596801

post-14134-0-95544700-1314098579_thumb.jpgpost-14134-0-30025000-1314098594_thumb.jpgpost-14134-0-90721400-1314098609_thumb.jpgpost-14134-0-68895600-1314098626_thumb.jpgpost-14134-0-80959700-1314098640_thumb.jpgpost-14134-0-40684100-1314098654_thumb.jpgpost-14134-0-14826200-1314098667_thumb.jpgpost-14134-0-52253500-1314098684_thumb.jpgpost-14134-0-32658900-1314098971_thumb.jpgpost-14134-0-99852200-1314098981_thumb.jpgpost-14134-0-73591100-1314099013_thumb.jpg

Edited by Shakiel
Link to comment
https://www.sau.com.au/forums/topic/375028-1994-r32-gtr-abandoned-project/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

PARTING EVERYTHING OUT

HERE IS A LIST OF WHAT IS UP FOR GRABS, PM FOR ANYTHING YOU ARE INTERESTED IN

Roll Cage

Turbo back twin exhaust

RB26 Motor (Mines dump pipes, NISMO n1's, TRUST fuel rail, Sard 700cc injectors, NISMO clutch and flywheel)

TOMEI fuel pump

Standard GTR fuel pump

NISTUNE ECU and GTR LOOM

ARC Intercooler

APEXI twin pod filter with AFM's

Gearbox/transfer case

NARDI steering wheel

NISMO instrument cluster plus NISMO center console gauges

APEXI boost gauge

Aero kit - Front bar, side skirts, rear bar

Aftermarket bonnet

R33 Skyline wheels

Front and rear brake calipers

RECARO fixed bucket seat

GTR passenger seat

Headlights

Rear tail lights

NISMO rear lower control arms, rear camber arms, upper arms

HKS piping kit minus HKS pod filters

1994 R32 GTR Shell no accidents. Perfect to drop everything straight into.

Anyone after pics of an item, let me know I'll get it arranged and sent to you.

Quicker responses if you contact me on 0403596801.

Thanks.

Roll Cage - $1,000

Turbo back twin exhaust - $800

RB26 Motor (Mines dump pipes, NISMO n1's, TRUST fuel rail, Sard 700cc injectors, NISMO clutch and flywheel) *DUMP PIPES, INJECTORS, FUEL RAIL UNDER NEGOTIATION* $2,500 with out mentioned parts in negotiation

TOMEI fuel pump - SOLD pending payment

Standard GTR fuel pump - $100

NISTUNE ECU and GTR LOOM - $800

ARC Intercooler - $800 *UNDER NEGOTIATION*

APEXI twin pod filter with AFM's - $300/$150 without AFMS

Gearbox/transfer case - $1000

NARDI steering wheel - $200

NISMO instrument cluster plus NISMO center console gauges - $350

APEXI boost gauge - $100

Aero kit - Front bar, side skirts, rear bar - *FRONT BAR IN NEGOTIATION* side skirts, rear bar $250

Aftermarket bonnet - *NEGOTIATION*

Front and rear brake calipers - $400

RECARO fixed bucket seat - $750

GTR passenger seat - $250

Headlights - $250

Rear tail lights - $150

NISMO rear lower control arms, rear camber arms, upper arms - $250

1994 R32 GTR Shell no accidents, complied etc. Perfect to drop everything straight into - $4500

hi, just wondering what the internal diameter of the twin exhaust was?

also, shipping cost to sydney, 2756?

thanks.

2.5 inch and no idea. I'll find out and let you know mate!

THanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...