Jump to content
SAU Community

Recommended Posts

Flame suit on.

Okay, so had bought a reliable car, a 2000 magna, auto. And the auto box died with the semi-common failure of a wave spring deep in the box. It's been off the road for 3 weeks while I've sourced a cheap, second hand reco'd gearbox and had it shipped from Melbourne. Given I have no car and the magna needs to be towed to a mechanic for the transplant, it could be 2 more weeks before I get the box to the car and get the mechanic to fit it.

So, again, looking at a reliable car, to buy asap cos I'm so sick of not having one. I've owned camrys before and they've been pretty damn reliable given the neglect they've received from me and my family (before my automotive enlightenment).

Does anyone know how the 3.0L engine compares to the 2.2L, and the manual compares to the auto, in terms of reliability in 1996-2000 camrys?

A long shot, I know, but I am amazed at the wealth of knowledge on these forums on a daily basis.

Cheers all :D

Link to comment
https://www.sau.com.au/forums/topic/375256-camry-enginebox-reliability/
Share on other sites

Cheers mate. Yeah, our family had a '94 camry for a lot of years, likewise a '98 one. Both auto 2.2L and both were very reliable (except for some small oil leak that dripped onto and destroyed the timing belt on the '94 one before I owned it).

I'm looking for a manual v6, as long as the reliability is still there and the price is right. Just want something that goes, is safe and is reliable. Then to save for a fun car again banana.gif

Edited by Galois

Depends on kms, location etc. Seem to be under 5k for what I'm after. Magna is the other car, which would be a significantly better buy in terms of power/riding the wave of torque (300 Nm). Some autos are a bit of a time bomb, I'm one of the unlucky ones apparently.

A manual 3rd gen magna with either the 3.0L or 3.5L engine is a real surprise. My brother recently got a manual 2002 magna, 3.5L, with a new clutch, brakes and new suspension, a parana chip (whatever that is) and a tune for 4.5k and it is an absolute beast of torque. The new suspension makes a world of difference too. He's gonna need to upgrade the clutch soon lol.

I'm thinking of getting something like that as the next car, if we sell the auto magna. Ahh, one day i'll have a propper sports car again lol, atm I'm just aiming for a running car.

Edited by Galois

yeah manual magnas are great (i've owned 2 3.5L ones, pretty sure i've discussed this with you in the past).

as for the v6 camry, i don't know much about them but i would think that being a camry it should be pretty reliable as they aren't really commonly bought by younger people so there is much less chance it's had a hard life. probably the biggest issue is more if it's been owned by someone who doesn't get it serviced as often as they should

Yeah, I should have gone with a manual one! Will again one day, prolly a vrx.

There's also the issue of dreamers who think their sh!thouse cars are worth as much as a premium one, oh wait that's an issue with all second hand car buying

My folks had a '94 2.2L Auto. Was never thrashed and was kelt serviced by my old man who's a mechanic (auto trans) by trade.

Two head gaskets over 2 years. Once with a rebuild. I sold it for them, blown, for $800. Hated that bloody thing.

my gf has a avalon 1M-FE (i think) 3 litre V6 auto . . has 200,000ks on the clock and doesnt seem to want to stop, all weve had to do is have the rocker cover gaskets changed + regular servicing and minor stuff like brake pads (easy to do yourself)and parts are cheap and plentifull. . . .bloke over here in the west dropped a (aftermarket) turbo version in his MR2 , goes like hell

my gf has the 1M-FE (i think) V6 3 litre auto in her avalon . . good economical motor with no issues, cheap parts, easy to fix, just a bit hard to access anything on the back of the motor

We ended up getting a 2000 model auto v6, and couldn't be happier with the buy. The suspension is still firm, the power is all there, easily blasting along without going above 3k rpm. Had the trailer on it yesterday and it was fine, almost like itbwasnt there. Its got 190k (major service every 150 thou, not 100), but of the half dozen we tested over the weekend, all with much lower km, it was by far the best.

Doesn't white have the torque of the 3.5 magna, but the build.quality and comfort seems much better

Not sure which model Camry (V6 models only) - but keep an eye on the knock sensors, crank angle sensor and waterpump.

Always use toyota genuine coolant.

Apparently the variable intake length manifold may play up, which may cause the car to fell a little sluggish, but will not cause you to break down.

Not sure which model Camry (V6 models only) - but keep an eye on the knock sensors, crank angle sensor and waterpump.

Always use toyota genuine coolant.

Apparently the variable intake length manifold may play up, which may cause the car to fell a little sluggish, but will not cause you to break down.

Hmmm, how exactly do I keep an eye on them? Watch for the engine light and listen for knocking? How would I notice if the variable length intake manifold (didn't know it had one btw lol) is playing up? Sorry for the qs.

how much did you pay?

$4700, I'm imagining we'll be using this car for a long long time though. It's so comfortable, easily enough grunt to pull a trailer on a freeway, just nice to cruise in. I just have to make sure to keep up the amorall and waxing etc to keep it in good shape. Will probably change all fluids over the next 20k km, just so I know what's in there. Might be worth putting a transmission cooler on too.

How's the soarer going?

pretty good. i've gotten used to the r154, its a little clunky, but you learn to deal with it. i'll have to do the timing belts soon though. and i haven't fixed my speed sensor. so i get lottery numbers at speeds above 70kmh. lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So you can then buy a more expensive, less reliable, more boring and slower replacement that's harder to work on and you have no knowledge of?
    • Will take much better photos when the time comes, I still want to do a sub 1m50s on street tyres at SMSP (just because). Then will slap on proper tyres and see if the car can get down to 1m40~45s range. If it goes sun 1m40s without aero, then wow.. but I don't expect the shit box to go that fast.
    • I have the OS Giken R3C with the GM 26 spline input shaft in my 32(Rb32 with only around 750hp atw) and its a pig to drive. Its actually very forgiving when its cold when when its warmed up, it chirps the tires even when trying to take off slowly. Mind you though, part of this has to do with my clutch master(Non-OEM) so the travel on the rod is shorter. How did you get 1130hp at 85% @e50?! Are you running a stroker? If so, I would recommend the R3C purely because it handles the abuse.
    • First time trying out a regularity format at the Peter Hall Memorial 6hr. It was an interesting experience with everyone on our team being brand new to the format. Safe to say reading and understanding the rules and scoring system would have really helped our team. We finished firmly last thanks to the majority of all laps across the team being penalties. In the words of my teammate Matt “Turns out we are both too quick and illiterate.” Another car had entered before us and already secured number 12 so i needed to clearly cross them out to avoid confusion for any other blue calsonic livery'd r32s at the event. The team consisted of an R32, an AE86, a supercharged V35, and a Kia CEED GT bought at salvage. I ensured we all had matching "Peer Pressure Racing" banners and overalls. This is the longest session of back to back hot laps the car has ever done (20mins no cool downs on a hot day).  It was a true test of the cooling /oil control mods and they certainly made big difference! Enjoy watching me lose 14 concurrent points for the team:  Unfortunately I only managed 45mins of track time over 3 sessions (20min, 20min, 5min) out of my allotted 90mins before my gearbox let go. Something related to shifter fork resulting in 3rd being neutral quickly followed by all gears neutral, then it being lock in two gears at once and unable to move. Optimistically there were no bad noises. But I am yet to pull box out and diagnose. Fortunately i was also to snag a tow home while I slapped a permit on the Kiaa which came on a trailer
    • Haha thanks for reply man Trying luck and Hoping to find one from all the sources, it's hard to find one as Nissan stopped production on sunroof glass panels
×
×
  • Create New...