Jump to content
SAU Community

R33 Gts-T Clutch Pedal Bracket

Trozzle
 Share

Recommended Posts

Trozzle Grand Master

Trozzle

Posted
Posted

Yeah yeah, searched various sections. I'm sick of starting threads too...so just want concise answers please :)

my pedal bracket snapped, as they do. Now it's easily fixed up by frankenstein-style welding that shit - but I need to remove it. I'm not at all interested in dismantling my dash (at least not too much) so I want to know - has anyone removed it on a GTS-T without taking their dash out? Is it doable? I've heard speculation that the bracket itself is actually spot-welded onto the firewall as well as bolted in, true?

If anyone has pics of the standard pedal bracket out of the car, it would be much appreciated so I can see where the mounting points are :D

post-60560-0-40915300-1315026344_thumb.jpg

that's what's up with mine. Easy fix, if I can get it out.

cheers

Link to comment
https://www.sau.com.au/forums/topic/376086-r33-gts-t-clutch-pedal-bracket/
Share on other sites
R31 POWER Mentor

R31 POWER

Posted
Posted

Easy as.

- Undo the 2 nuts on the master cylinder in the engine bay.

- Get a torch and pull the pin on the clutch cylinder rod.

- Unplug the clutch pedal switch

- Undo bolt pointing straight up hold pedal box.

Wiggle it out. Should take about about 30mins first time.

  • Like 1
turboedsloth Grand Master

turboedsloth

Posted
Posted

Its not a bitch, just a tight space. As the other guys have said its that easy. Once you've welded it back up, paint it silver then you can say it's a nismo unit. Cos thats all they do

Trozzle Grand Master

Trozzle

Posted
  • Author
Posted

I've found the final mounting point of the bracket. There is NO WAY you can undo it. It's up the very top of the bracket.

Unless there's something different about my pedal bracket, I call bullshit that anyone has ever done this with the dash in place.

Trozzle Grand Master

Trozzle

Posted
  • Author
Posted

I have, a few times. I use a 3/8 drive swivel socket, 12mm from memory. Got a kid nearby with skinny hands??

swivel socket = effectively a U-joint?

looking at pics of the "Nismo" replacement, I'll be using a long extension for the socket and going straight up IN FRONT of the pedal itself?

turboedsloth Grand Master

turboedsloth

Posted
Posted

http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=86651&group_ID=325&store=&dir=catalog

Something like that sucker, 3/8 drive rachet, 120mm extension and socket. Dunno why yours is being so difficult

Trozzle Grand Master

Trozzle

Posted
  • Author
Posted

ok all good mate, got it done.

Mine was so difficult because it took me forever to find that last bolt, and then because of how I discovered it I concluded it wasn't possible to get to.

Ended up just using the larger ratchet drive (since I don't have any small drive 12mm sockets) and a really long extension.

Trozzle Grand Master

Trozzle

Posted
  • Author
Posted

And it's back in. I must say, putting it back in was MILLIONS times more difficult than pulling it out. That bolt I was having trouble finding was a PRICK to get back in :(

Either way, she's welded up nicely (read: horribly. We used an arc welder - blew a few holes through the bracket rofl) and back in. Only downside is my battery went flat from having the door open all the time :(

Thanks for the help guys!

  • 3 years later...
shizz Apprentice

shizz

Posted
Posted

WOW I have never pulled out a clutch peddle befor and got it out in about 20 minutes, welded it up and back it took no longer than 1 hour. only 2 nuts, 1 bolt and a pin. super easy !! but I am a bike mechanic so it would be easier than if you have never really done this be for but very good to learn how to fix these small things rather than paying someone probably about $400 to fix it for you

jiffo Mentor

jiffo

Posted
Posted

Yes not that difficult, but I found breaking other items was the worst part, boot release for example.

So whenever I'm working on/under/around the dash, out come the front seats first thing.

Then unbolt the boot release as the handle is flimsy plastic and if you accidentally sit on it, she'll break.

Toss in a few bags of rags to lie on and I'm ready to go.

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...