Jump to content
SAU Community

Recommended Posts

benm i just got the tyres the same day i went to the track so i didnt get time for practise with the best launch technique. Plus my car is auto so i cant do big clutch dumps so i was stalling it to about 2.5 - 3k then flooring it. ill get my alloy bushes fitted and practise some more and ill see how i go.

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Hi Matt, road tyres take at least 500 k's to "run in".  They give off oil and other lubricants used in their manufacture.  So they have to heat cycle a number of times to make sure the "slippery stuff" is cooked off.  When they are new the more you "smoke em up" the worse the grip gets as buckets loads of lubricants all come out at once.  So run them in.

This is spot on. I put new tyres on yesterday and decided to launch them hard right away. They were absolutely appalling so I backed off. When I got home there was a layer of oily residue around the paint work of the rear wheels, evidence that "lubricants" had come off at once. It looked very similar to when I got off the skid pan!

They guy at the tyre shop said they'll need to be "scrubbed in" for about 100-200km before they start to stick properly. I've done about 90km since and the difference is already amazing when compared to yesterday's first efforts.

You can check my new rims out by looking here :)

i thought i would bring it up as some of the monkeys in the tyre shops pump the tyres up so hard its silly, i ran speedway for ten years and found tyre pressure very importane part of tune car set up and after watch some serious dragster it seems to be true in drag racing .

i found it had a huge influnce on my gtr launching and ran a 1.7 60foot on a lighty tune r33 gtr

I want GRIP, my mate has 223rwkw and can rip it off the line and doesnt lose traction through gear changes, he had federals 255/17 i think u can at least go 245 with your 8" wheels. He now has Eagles or something just cheapo ones but seem to be ok.. i think it MAY have something to do with his full sick mechanical diff but not sure

I read up to this post made by Dent ... anyway he is talking about my car here. I have crappy 255/17 Federals on the rear and I dont loose any traction kicking it off the line at 4000 RPMs. I have a mechanical diff and I think this makes all the difference. Apart from this Dents car is better equipped suspension wise. I also think is has a lot to do with the way you launch the car, releasing the clutch and so on!

I put new tyres on yesterday and decided to launch them hard right away. They were absolutely appalling so I backed off. When I got home there was a layer of oily residue around the paint work of the rear wheels, evidence that "lubricants" had come off at once. It looked very similar to when I got off the skid pan!

I'd be keen to know what you think of the K104's once you've had them for a while.

I'm thinking of getting them on my 17's (235/45/17) next time around.

Cheers

J

Just got some RE540s (second hand) fitted to the rears - huge difference, the stiff sidewall, which is kevlar reinforced really tightens up the handling, and they stick - probably a bit too much for my liking, as I dont mind a bit of throttle steer.

Next I think I will be trying to source something similar to 540s for the front and giving trampios a bash for the rears.

ive got pierelli pzero's 255s on my 33 gtst with 141rwkw and it will spin if you launch at like 3000rpm, of course it will spin when u do that, but other than that it loves it. hardly ever spins. vare rare to get it to chirp as its got so much grip. my wheels are 17" not sure on other placard stuff. just 17" 255's on the rear. bloody expensive tyres too, like $500 each

ive never felt better tyres in my life. they are great, well worth the money

i'm a fan of the trampios r1r's.

i've been using them for about 6 months now with a couple of trackdays, wear is fantastic, grip (wet and dry) is fantastic. with ~200rwkw and 255's on the rear i can't spin them up - though its not like i ever do 4-5-6000rpm dumps!!!

i'd like to try the azenis's next just to compare.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...