Jump to content
SAU Community

Recommended Posts

Hey guys,

Have a bit of an interesting one....

The oil from my gearbox keeps spewing out from the breather line which ends up near the top of the bellhousing. Bought the car with fresh shockprook oil put in and thought it must have been overfilled so i wiped away the excess, checked the oil level (just below the filler hole) and didnt take too much notice of it since. Now (2 weeks later since being wiped away) i had a look underneath the car and it's still spewing out. I've checked the oil level and its about 10mm below the filler hole, so its not overfilled.

Is there a small breather, like on a diff, on the gearbox that might be blocked causing excess pressure?

Link to comment
https://www.sau.com.au/forums/topic/376791-gearbox-pressure-build-up/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys,

Have a bit of an interesting one....

The oil from my gearbox keeps spewing out from the breather line which ends up near the top of the bellhousing. Bought the car with fresh shockprook oil put in and thought it must have been overfilled so i wiped away the excess, checked the oil level (just below the filler hole) and didnt take too much notice of it since. Now (2 weeks later since being wiped away) i had a look underneath the car and it's still spewing out. I've checked the oil level and its about 10mm below the filler hole, so its not overfilled.

Is there a small breather, like on a diff, on the gearbox that might be blocked causing excess pressure?

Change the shockproof for something else. We had the same problem in both our race cars and a couple of customers cars that shockproof went into.

Yes, I have had the same issue with the race car....it continually breathes smurf blood

I read maybe 12 months back, there was a bad batch of shockproof. I've been running shockproof lightweight for 2 or more years and it's never spat a drop out the breathers

Interesting....I bought mine about 12 months back, and from a very dodgy shop. Got any more info?

Yes, I have had the same issue with the race car....it continually breathes smurf blood

Interesting....I bought mine about 12 months back, and from a very dodgy shop. Got any more info?

Lol, had a fix to the issue in the race car?

I'll give it one more chance and i'll check back on it in a couple of days, if its still spewing it out i'll change to something different. Just seems hard to beleive about the supposed "bad batch", no offense moodles.

The gearbox seems to select all gears fine, the only sounds i can hear from it are when downshifting into neutral to a stop i can hear the gears/synchro whirring back down to the same speed (not a bad whirring).

Edited by joeyta22

sure....I put a breather/catch can up near the brake master cylinder...and refill the box after each race meet.....and degrease under the car often....and park it over an oil catch tray.

fixed easy!

  • 2 weeks later...

the problem with SHOCKPROOF oil is that about 12-18 month's ago, they discovered that the main ingredient

that made it as good as what it was, was carcinogenic so they had to remove said ingredient and replace

it with something else, and it's never been the same since...

I also have this problem at the moment and the bell houseing gets caked in oil after just 1 week of driving and its been doing it for the 5000km (1 year) its been in there.

I think lightweight shock proof is not worth anything anymore because i saw a track evo the other week use it and after 1 day it came out black?????????

What the point if it cant stay in the box or if it can it just goes black with heat stress...........changing to AMSOIL SEVERE GEAR Synthetic Extreme Pressure next service.

how much $ was this? im assuming 3 litres

I get all my oil through Harold at performancelub as linked above, awesome to deal with, prices are good and sends stuff out very quickly. Mine took about 4.2L with a little bit of spillage.

Yeah give it a shot central coast person, sound like you have the same problem as i did.

Come to think about it ive been having problems with the gearbox in my 180 drift-pig spewing out shockproof aswell (havnt driven it in about a month), i always just thought i had a leak around the top of the case. Hmmm im sensing a common theme here...

Edited by joeyta22

The GTR/GTST 25 boxes should take about 3.6-3.8L

And don't tell me that you put 3L in your mates mates car and it was full. Drive the car around the block and check it again.

Most of the R200 rear diffs will take 1.6-1.7L front diffs in the GTR about the same but closer to 1.5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...