Jump to content
SAU Community

Recommended Posts

Hey guys,

Have a bit of an interesting one....

The oil from my gearbox keeps spewing out from the breather line which ends up near the top of the bellhousing. Bought the car with fresh shockprook oil put in and thought it must have been overfilled so i wiped away the excess, checked the oil level (just below the filler hole) and didnt take too much notice of it since. Now (2 weeks later since being wiped away) i had a look underneath the car and it's still spewing out. I've checked the oil level and its about 10mm below the filler hole, so its not overfilled.

Is there a small breather, like on a diff, on the gearbox that might be blocked causing excess pressure?

Link to comment
https://www.sau.com.au/forums/topic/376791-gearbox-pressure-build-up/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys,

Have a bit of an interesting one....

The oil from my gearbox keeps spewing out from the breather line which ends up near the top of the bellhousing. Bought the car with fresh shockprook oil put in and thought it must have been overfilled so i wiped away the excess, checked the oil level (just below the filler hole) and didnt take too much notice of it since. Now (2 weeks later since being wiped away) i had a look underneath the car and it's still spewing out. I've checked the oil level and its about 10mm below the filler hole, so its not overfilled.

Is there a small breather, like on a diff, on the gearbox that might be blocked causing excess pressure?

Change the shockproof for something else. We had the same problem in both our race cars and a couple of customers cars that shockproof went into.

Yes, I have had the same issue with the race car....it continually breathes smurf blood

I read maybe 12 months back, there was a bad batch of shockproof. I've been running shockproof lightweight for 2 or more years and it's never spat a drop out the breathers

Interesting....I bought mine about 12 months back, and from a very dodgy shop. Got any more info?

Yes, I have had the same issue with the race car....it continually breathes smurf blood

Interesting....I bought mine about 12 months back, and from a very dodgy shop. Got any more info?

Lol, had a fix to the issue in the race car?

I'll give it one more chance and i'll check back on it in a couple of days, if its still spewing it out i'll change to something different. Just seems hard to beleive about the supposed "bad batch", no offense moodles.

The gearbox seems to select all gears fine, the only sounds i can hear from it are when downshifting into neutral to a stop i can hear the gears/synchro whirring back down to the same speed (not a bad whirring).

Edited by joeyta22

sure....I put a breather/catch can up near the brake master cylinder...and refill the box after each race meet.....and degrease under the car often....and park it over an oil catch tray.

fixed easy!

  • 2 weeks later...

the problem with SHOCKPROOF oil is that about 12-18 month's ago, they discovered that the main ingredient

that made it as good as what it was, was carcinogenic so they had to remove said ingredient and replace

it with something else, and it's never been the same since...

I also have this problem at the moment and the bell houseing gets caked in oil after just 1 week of driving and its been doing it for the 5000km (1 year) its been in there.

I think lightweight shock proof is not worth anything anymore because i saw a track evo the other week use it and after 1 day it came out black?????????

What the point if it cant stay in the box or if it can it just goes black with heat stress...........changing to AMSOIL SEVERE GEAR Synthetic Extreme Pressure next service.

how much $ was this? im assuming 3 litres

I get all my oil through Harold at performancelub as linked above, awesome to deal with, prices are good and sends stuff out very quickly. Mine took about 4.2L with a little bit of spillage.

Yeah give it a shot central coast person, sound like you have the same problem as i did.

Come to think about it ive been having problems with the gearbox in my 180 drift-pig spewing out shockproof aswell (havnt driven it in about a month), i always just thought i had a leak around the top of the case. Hmmm im sensing a common theme here...

Edited by joeyta22

The GTR/GTST 25 boxes should take about 3.6-3.8L

And don't tell me that you put 3L in your mates mates car and it was full. Drive the car around the block and check it again.

Most of the R200 rear diffs will take 1.6-1.7L front diffs in the GTR about the same but closer to 1.5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...