Jump to content
SAU Community

Recommended Posts

And Matt, GenX2 is ADR approved....

I want to make around 700hp (about 440rwkw or so) without forced induction using the LeMans developed Corvette C5R endurance racing components. Nothing like having a big cranky lump of alloy under the bonnet

That's icing on the cake really. Full ADR approval, 11sec 1/4's and defect free.

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

Many thanks to Mark from www.pulsarparts.com.au for this happy snap. This was my first burnout attempt from Sat night. Piss poor as per usual.

My last effort of the night was actually very close to a REAL burnout, as I held it for 3x the length of this one.

Apr3_48_04.jpg

Matt,

How do you go holding the burnout for a length of time.

I find if I change gears I loose my brakes.. Hence go from first to second it won't hold. The brake pedal goes hard and creeps slowly forward.

Gotta luv the tread pattern on those tyres but. :D

Martin,

The old saying.. "There's no replacement for displacement" :)

The ol' 5ltr didn't cut it for me, especially the ol GM 5ltr with its crappy banana manifold.

Honestly though what will the putting around fuel consumption of a new generation 427 beast be like?

Joel,

I line up in the water, select 2nd, pop the clutch at 4k or so and then let the torque do the rest. The car still moves a little bit but only because I'm still getting the hang of side stepping the clutch and jumping onto the brake in one quick movement.

The trick is to "start" the burnout in the water (purely to reduce drivetrain stress) and then when ready ease forward until you're out of the water. Once on the dry stuff it "should" start to generate smoke and heat.

Dean, Martin uses these tyres - Apr3_14_04.jpg

I think it was pretty nicely moderated after martins lashing out at me after he suggested we race for money and naming me a tosser and having a go at my car because its 15 year olds and ugly, and he could hav bought at least 15 with the money he has spent on the ute.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...