Jump to content
SAU Community

Registering A Non-Complied Car, Anyone Done This?


Recommended Posts

Hey guys,

I've just bought myself a 32 GTR which i was led to beleive had previously been registered in aus and was complied ready to go, turns out this isn't true :(

So basically i need to put the car through transport and get an Australian VIN number stamped onto the chassis before i can proceed to register it, has anyone done this before? i'm really concerned about whats going to happen when it reaches transport as its had a little work done to it and is also a bit rough around the edges atm, the main concern i have though is it has an RB30 bottom end in it.

I'm also worried about the costs involved if they need to put side-intrusion bars in and change seatbelts, etc..

Any info will be appreciated,

Cheers,

Daniel.

Yeah i have a few times , does it have all the paperwork? (i.e import approval , engineers certificate if necessary , ais inspection ) , if it was a pre 89 , it will need aus spec seatbelts , babyseat bolts , r/h mirror in memory and usually the ais station puts the vin on the car with number/letter punch thingys

It's not a blue gtr with a odd looking front bar?

It did have an odd bar so yeah its it, its a 12/1990 model, i have the import document with the approval number, and its been to an AIS and had an inspection done, failed for tint, "unapproved suspension mods" (coilovers) and no australian compliance plate, tint has been removed, and the coilovers will be removed if it fails for it again where i'm going... just concerned about getting the compliance plate/vin number.

It did have an odd bar so yeah its it, its a 12/1990 model, i have the import document with the approval number, and its been to an AIS and had an inspection done, failed for tint, "unapproved suspension mods" (coilovers) and no australian compliance plate, tint has been removed, and the coilovers will be removed if it fails for it again where i'm going... just concerned about getting the compliance plate/vin number.

is this the one tha was up prospect mechanic behind the iga???

  • 2 weeks later...

Sure is :thumbsup:

ahh so its not registered haha i was so angry when i saw that thing i also have a blue r32 gtr that has a 26/30 going in it atm couldnt belive when i saw urs then they said it has a 26/30 in it to hahahaha

haha so we gonna start a blue r32gtr 26/30 club or what?

mine is not worthy of pics atm as it is still in peices and half primer getting painted soon voodoo blue ;)

Mine is soon to be under the gun also :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...