Jump to content
SAU Community

Recommended Posts

Won't see the block for a couple of weeks, but thanks for the offer!!

Got the HKS front pipes today as well as,

CP pistons kit

valve guides

Ross toughbond balancer

The block, crank, studs, balancer, clutch and flywheel are now at the engine reconditioners to get cleaned, balanced etc.

Now is it worth it getting the block grout filled to the bottom of the lower water jacket welsh plugs....

Block is getting the full treatment then grubscrewed. Got to remember to tell the engine guy to drill out the oil returns in the block too.

Original engine was pretty clean. Crank, was pretty good, but we shall see.

Windsor engine reconditioners are doing the machining.

The modified oldschool g clamp my dad gave me years ago to do pushrod engines won't cut it on these heads :pirate: , because they are so deep.

And I couldn't be bothered buying one, making/modifying stuff is cool.

Windsor engine reconditioners are doing the machining.

The modified oldschool g clamp my dad gave me years ago to do pushrod engines won't cut it on these heads :pirate: , because they are so deep.

And I couldn't be bothered buying one, making/modifying stuff is cool.

keen to hear how much this will be, let me know what Steve does and how much as i've got to get my head sorted out aswell

Went the engine shop this arvo and did some stuff.

Started with weighing the pistons, and difference between lightest and heaviest was 1.1 grams. Weight matched CP pistons to less than 0.1 gram to each other after using linisher and digital scales.

Weighed gudgeon pins and they were all the same.

Then was told that the engine oil could make up 5 grams difference in weight in an engine. Oh well at least they are all the same.

Drilled out the head oil returns to the size of the head gasket.

Crank will get grubscrewed as they use aluminum plugs on the ends of the big end oil drill holes.

Also got to setup a 304 V8 crank with bob weights on a crankshaft balancing machine, what a pain!! At least inline 4's, 6's, 8's don't need bob weights, you just need the pistons, rods etc to be spot on and all the same.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...