Jump to content
SAU Community

Recommended Posts

Guess what time it is - that's right DECA TIME!!!

It's on again and I have booked us the hotel in Shepp for the upcoming DECA.

When: Fri 18 & Sat 19 November

Where: Tirana Motor Inn

Address: 33 -37 Wyndham St, Shepparton

Cost: $50 per person per night (if sharing)

$85 per night to have a single person in a room by themselves

If you would like a room, please let me know as soon as possible, they will want to release to the public whatever rooms we are not using in a few weeks.

I need to know:

* nights staying

* how many people

* what bed configurations you need (ie twin, double etc)

If you are coming by yourself, that's fine, just let me know and I will team you up with somebody else to share a room with.

Let me know here, by email, by PM or by phone.

The sooner you tell me, the easier you make it for me.

*** NOTE - if the hotel books out, preference will be given to those staying both nights

- if you ask for a room and don't turn up without letting me know, you get added to my black list (you ppl are starting to ruin it for everyone)

Entries coming soon

DINNER

Dinner has been booked again at Taco Bills with Baz, Chris & Kylie running the night again.

If you are staying Saturday night at the hotel, I will book you a seat at dinner. If anyone else stays in Shepp, but not with us, let me know so I can add you to our booking.

Add to Dinner:

Link to comment
https://www.sau.com.au/forums/topic/378958-deca-accommodation-november-1819/
Share on other sites

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Fri / Sat

Bec

Ryan

Daz & Lisa

Chris

Russ, Tim, Campbell, Dean, Mark & FEMINO!!

Leon

Newton

Tony

Mike Lowry :P

Wayne-O

Richo

Jett & Chris

Ashneel + 3 (family room)

Keiran, Brad, Tayler

Brent & Steph

Brent & Steph - 2 mates

Fri only

Shane & Megan

Odium & Leva

Gazelle

Chris Taylors Brother + friend

Sat only

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...