Jump to content
SAU Community

Recommended Posts

Ok so I've been servicing my car and the spark plug in cyl 5 wouldn't go in straight, still won't go in straight and I deserately need to be able to use the car tonight to get to my parents place. If someone is able to get a thread tapping kit or whatever to fix the threads and assist me in fixing it up it would be greatly appreciated. I can pay for your help.

Please anyone

My number is 0407891750 In Reservoir so prefferably someone in the northern suburbs or someone who doesn't

Cheers,

Michael

can you get your finger in there to see if anything is stuck to the thread?

Theres either something in there, the last plug was cross threaded, the plug your putting in has something wrong with it or your just doing it wrong.

Please tell me you screwed it in by hand the first 2 turns and didn't just use the socket from the get go for the new plugs. If you did do that then you might have a problem. Can't see thread f**king up when just removing plugs. Normally a poblem caused by putting them back in

That is the worst case scenario, if you really need the car tonight you could try forcing it back in straight and see if it seals, after all if it was Cross threaded the already needs to come of to hella coil it properly

You can try cleaning the thread with a wire brush or, what I do to clean my threads regularly is roll up a thin piece of scourer and twist it inside the thread...usually makes it looser to install new plugs. Really though, I'd ditch what you're doing or borrow a car and tackle it another time. If you rush it you may not succeed, which leaves you stranded AND with a rooted head.

I ended up changing my plans and buying a tap that collapses so that it comes through the bottom and cleans the thread u to the top. No removing the head and helicoil bullshit and no metal in the cylinder. Should get here monday, borrowed a car for the meantime.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...