Jump to content
SAU Community

Welsh Plug

bunta08

By bunta08,
in General Maintenance

 Share

Recommended Posts

bunta08 Apprentice

bunta08

Posted
Posted

ok so a couple of days ago now i was driving down the road and heard a pop noise so i looked in my rear view mirror and i see a whole pile of steam behind me. So i drove the car home seeing as i was at the end of my street and popped the bonnet to see where it was coming from but i couldnt see a dam thing so i just let it sit there over night wondering what could have blown.

next morning i walked out side and had a look, checked all of the hoses and everything but couldnt find a thing till i checked the welsh plug at the back of the head and to my surprise apparently i blew the whole middle of the welsh plug out and only the outside ring is left

so my question is, is there anyway i can replace this without taking the whole engine out? or am i just gonna have to suck it up and remove the engine?

Link to comment
Share on other sites
skylinesthelimit Apprentice

skylinesthelimit

Posted
Posted

Facing the exact same problem.. RB20DE engine has lost its welsh plug at the back of the engine.. Right up against the firewall... I can stick my hand in there and feel around but really cant do much else without taking the rest of the engine out... I did hear about expanding rubber plugs that can be used? I couldnt find any other info on this tho.. As I dont have the facilities at home, how much would I be looking at if I took it to a shop and they had to lift everything out etc etc..? Better off even dropping a 25 in, cost wise?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Yeah, I get that. I try to be as cost-efficient as possible with cars, and typically prefer to buy them at the bottom of their depreciation curve. I was looking at those Bilsteins too as they're roughly in the same price bracket as the BC's - lack of adjustability and being soft put me off, not that I want anything too hard. That's my issue with the Skyline, it's too expensive and it's reflected in my driving. I don't mind going full pelt as long as there's a gravel trap to catch me. Really, proper safety equipment is needed for total confidence. Well this just turned up for the BMW. I'll try and get the front together tomorrow and take some pics of the absolutely horrid rear end; perhaps I'll have a crack at the rear on Wednesday. I need to make the car drivable before the weekend as I'll be driving it over to London.    
    • Orza81
      1993 TH1 Blue R32 Skyline GTR VSpec

      By Orza81 · Posted

      Hi SAU community  Wondering what my 93 Very RARE TH1 Blue R32 GTR VSpec is worth these days?? Build is fairly dated now All Mods are Compliance Approved  Runs RB26 done only 10000ks Greddy T88 done only 8000ks HKS Cam 1000cc Injectors Full Titanium Exhaust Nismo Intercooler Nismo Oil Cooler HKS Oil sump Tein Super Street Coils Cusco Sway Bars RAYS TE37 19x10.5 DYNO street tune makes around 700hp on 98octane  
    • r34.rory
      Hazards not working R34 GTT

      By r34.rory · Posted

      It does sound like a fuse considering the indicators work..I’ll triple check when I’m free and report back.    thanks for the reply.
    • JC71
      98 ER34 GTT idle races, if AAC is unplugged, then idles perfect

      By JC71 · Posted

      no, the car was a manual 5 speed from the factory and still is.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      While going through data logs late last week, I spotted a small issue with my WMI. My WMI starts to progressively inject at 11psi of boost. I'm using a 25psi cut in pressure switch on my WMI as an added safety and if the curve is linear, I should hit that 25psi on my WMI system around 13-14psi of boost.  As per my data logs, my WMI pressure switch only activates around 19psi of boost. This is causing my non WMI 4D map to trim for WMI. I'm presuming this is caused by the mechanical switch response time, injection curve not being linear or both.  I ordered a 2-10psi adjustable cut in pressure switch which should correct this. If this doesn't resolve it before my dyno appointment on Friday, I'll just remove the pressure switch temporarily and more than likely replace it with a pressure transmitter afterwards.    BTW Speedtek has yet to refund me.
×
×
  • Create New...