Jump to content
SAU Community

Recommended Posts

Don't have any other pics atm.

The guards are completely flat, first picture is about -1deg camber, so really I'd need a decent flare. I had planned to run a 225/40 but the dude at the tyre shop talked me out of it... can't believe I listened

Anyone keen to roll my guards so I can wind my coilovers down?

do you have a roller and a heat gun and you are asking someone to roll them for you, or do you need someone with a roller to come and roll them

do you have a roller and a heat gun and you are asking someone to roll them for you, or do you need someone with a roller to come and roll them

The latter, if I had a roller I'd do em myself.

The latter, if I had a roller I'd do em myself.

can't help you there

a few people can do them though, Primal, DT Panels, Athid, ADM(LCD user name on NS)

Look at the Zilvia fitment thread for a few hours... wouldn't 10.5 +2 require a flare on a 180?

yeah i already have a bit of a flare, i can run the 9 +5s with almost no camber

kinda an idea of how they sit, new ones will be 22mm further out

60.jpg

47.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...